Photosensitive edge Bander single cost 280 Yuan
photosensitive edge-banding machine comes with 5 sets of edge mould and 200 high-temperature edge film, for 450-
5 sets of edge mould specifications: square 20*20 round 42 38 oval or round 40 30*40

Welcome custom edging mold all kinds of specification can be made to order, three minimum, 80/a

Photosensitive edge banding machine operation method

1 power on turn the power switch on, red light on.  
2 set the temperature control knob pointer is positioned in the 160-170 on the stall, waiting for the heat at this time;
3 place the required edge mould in the heating Pan Preheat for approximately 5-8 minutes.  
4 well exposed photo-sensitive pad on the specifications in the same chapter.  
Sealing film for 5 inside shell wrapped in a mold press immediately disengaged;
Chapter 6 checking the finished shells and mat melt into one, around even if ineffective, repeat these steps.

Refueling method:

Open rear door-oil drops on the shell warehouse about10ml per cent or even drops in the front frame (only need5ml or so).

Note: edge banding machines and moulds are heated to extreme temperatures, operation of the edge banding machines must wear oven mitts to prevent burns.

Place to place equipment in the easy touch of children!