1. Name: Hot-Melt Glue Gun 2. HeLi HL-A60W Switchable and Adjustable Temperature Glue Gun 3. Large Glue Gun

二、特点：
Set temperature: 200℃ Applicable adhesive tape: 11-11.5mm Power:60W
1. This product uses high-tech ceramic PTC (Positive Temperature Coefficient) thermistors as heating elements, which allows for rapid heating. PTC thermistors maintain a constant temperature once they reach the design temperature of the glue gun, preventing further temperature increase and preventing damage to the glue gun due to overheating of the heating element. This saves energy and extends the service life of the glue gun.
2, the electrical insulation strength of this product does not break under 3750V/minute, and it can be used normally in AC or DC power sources between 100V and 240V. It is not limited by voltage fluctuations. It is equipped with a built-in safety fuse for safer use.
III. Scope of Application:

1. Toy models
2, artificial flowers, Christmas trees;
3，Decorations, Metal Products;
4, Wooden products, Cardboard, etc.;
5, Electronic circuit board.
 

Four, Usage Method
1. This series of products can be used with rubber strips measuring 1.1 centimeters in diameter.
2, insert the adhesive tape into the adhesive gun at the end, push it into the barrel, plug in the power, preheat for 5-8 minutes, then pull the trigger to extrude the melted adhesive, and you can control the amount of adhesive.
3, During use, if a whole rubber band is not used up at one time, do not remove it. You can use it again by plugging in the power and preheating for 5-8 minutes, then use it directly.
 

Five, Caution
1. The use of voltage is 100-240V, and the frequency is 50-60Hz.
2, This product is a high-temperature glue gun, and it should be used with the corresponding size of the glue tape according to the product series. If the user uses glue tape of the wrong size or type, it may cause the glue to reflux and damage the glue gun.
3, the nozzle of the sol gun and the melted glue strip are at high temperature, so do not touch with the body. It is prohibited to use in places with flammable and explosive materials;
4, when working with a glue gun, do not lift the gun high, and the nozzle should not be pointed upwards. If you do not use the glue for 15 consecutive minutes, please turn off the power to prevent the glue from melting backwards and damaging the glue gun.
5, due to the addition of durable materials in the glue gun, there may be smoke emitted during the initial use. After 30 minutes of use, the smoke will automatically disappear;
6, it should be regularly maintained to keep the gun tail slider clean to ensure that the seal can be smoothly delivered into the barrel.
7, Do not pull the glue tape out of the glue gun from the rear.
8, when the glue gun is not in use, it should be placed in a place with good ventilation and dryness, and it is prohibited to place it in a place with moisture or water. It is also prohibited to place it in a place where children or children can reach.
9. This tool must be placed on its stand when not in use.