2, installation and after clamping on the rack, adjust detection angle.


3, special occasions can be an external current standby power supply in case of mains power failure to ensure that its working properly.


Four, using methods


1, the machine consists of detectors (host) and consisting of remote control, remote control by the owner to carry, use as feature selections.


2, power LED light alert automatically after a delay of 30 seconds, when someone enters the detection area, the LEDs light up, and immediately sound the alarm.


3, when people leave or cease activities, alarm delay after 80 seconds from stop, the additional activities, alert again, and so on.


4, press "key lock" for security, click "switch button" for power supply output (sound does not stop, and no sound), press the "sound keys" for the emergency alarm, (sound, simultaneous output) and press "unlock key" for all functions removed.


Five notes


1, the installation height is 1.5-3.0 m from the ground is the best.


2 film, white is to receive the infra-red lens, do not scratch, if any stains with a clean cotton cloth inserted, no wear.


3, the cameras do not have a large unobstructed, so as not to affect detection.


4, to avoid installation in the vicinity of air conditioners, heaters and other heating element on or strong should not be installed in the air flow vents to avoid false positives.


5, Terminal or unplug the power plug when moving to ensure


6 power supply output relay contacts, when using an external electrical overload do not work. Intermediate relay available under special circumstances.


7, the operation of this product is not directly exposed to the outdoor environment without protection.


8, the product of the vertical sensor horizontal sensor sensitivity.