High-end intelligent sensing power-off temperature-adjustable 120W hot-melt glue gun, each with 3 large glue sticksGlue stick.

Instructions for Use:

1. This series of products can be used with rubber strips with a diameter of 11mm.
2. Before use, plug in the power and preheat for 5 minutes. Insert the adhesive tape from the end of the glue gun into the gun tube, and when you touch the touch point of the glue gun, it will automatically power on and heat up. Press the trigger to extrude the adhesive, and you can control the amount of glue.
3. During use, if a whole roll of adhesive tape is not used up at one time, do not remove the tape. You can plug in the power and heat it for 5-8 minutes before using it again.

4. After approximately 15-20 minutes away from the sensing point, the glue gun will automatically turn off the power.

 Product Features:

1. This glue gun uses ceramic and PTC thermistor to automatically maintain a constant temperature, providing quick heating and long service life.

2. Unrestricted by voltage fluctuations: Operating voltage: 100-240V

3. Automatic temperature control design to prevent overheating and include safety fuses for security.

Insulation Strength: 3750V non-breakdown.

5. Efficient and energy-saving constant temperature operation mode reduces the power consumption of the hot glue gun by 50%

Usage Notes:

1. The temperature is very high when working, and the nozzle and melted adhesive have very high temperatures. Do not touch with your body!!!

2. Use a white (or transparent) adhesive tape with a diameter of 11 mm. If you use a yellow adhesive tape or one with an incorrect diameter, it may cause the adhesive to flow back and damage the glue gun.3. Due to the high-temperature PTC heating element used in this glue gun, if no glue is applied for 15 consecutive minutes, please turn off the power to prevent...The glue tape melts backward, causing the glue to spill, and damages the glue gun.