宝贝名称：Car battery wire emergency line / 600AMP
treasure materialCopper-clad aluminum rubber
Baby Size: Approximately 3.6

WeightApproximately 1.75KG

宝贝描述:
Don't worry if your car won't start because it's out of battery. Just call a taxi and have it driven over to use another car's battery to start it easily!
Notes:
1. The two vehicles must not have any contact, and the electronic systems of the two cars need to have the same voltage.
2. If the battery is frozen, do not use this starter wire.
3. Before connecting, the engines, sound systems, and air conditioning of both cars need to be turned off.
4. After starting the engine, it is still necessary to remove the starting jumper wire in order, or there may be a short circuit.

Instructions:
The following is the connected program:
First, clamp the red wire of the starting line onto the positive red battery terminal of the 'rescue car.'
(2) Then clamp the other end of the red wire to the positive red battery terminal of the "rescue vehicle".
Clamp the black wire to the black negative battery of the 'rescue car'.
Then clamp the black wire to the black negative battery of the 'rescue vehicle'.
Start the engine of the 'rescue vehicle' first, and then start the engine of the 'rescued vehicle.' If the rescued vehicle still cannot be started, please check whether the metal contact parts are poor contact.
The following is the procedure for removing wires:
（1）Firstly, remove the black wire of the "rescue car".
Remove the black wires from the 'rescue vehicle'.
(3) Then remove the red wire of the "rescue car".
Finally, remove the red wire from the 'rescue car.'

宝贝名称：Car battery wire emergency line / 600AMP
treasure materialCopper-clad aluminum rubber
Baby Size: 3.6 meters
宝贝描述:
Don't worry if your car won't start because it's out of battery. Just call a taxi and have it driven over to use another car's battery to start it easily!
Notes:
1. The two vehicles must not have any contact, and the electronic systems of the two cars need to have the same voltage.
2. If the battery is frozen, do not use this starter wire.
3. Before connecting, the engines, sound systems, and air conditioning of both cars need to be turned off.
4. After starting the engine, it is still necessary to remove the starting jumper wire in order, or there may be a short circuit.

Instructions:
The following is the connected program:
First, clamp the red wire of the starting line onto the positive red battery terminal of the 'rescue car.'
(2) Then clamp the other end of the red wire to the positive red battery terminal of the "rescue vehicle".
Clamp the black wire to the black negative battery of the 'rescue car'.
Then clamp the black wire to the black negative battery of the 'rescue vehicle'.
Start the engine of the 'rescue vehicle' first, and then start the engine of the 'rescued vehicle.' If the rescued vehicle still cannot be started, please check whether the metal contact parts are poor contact.
The following is the procedure for removing wires:
（1）Firstly, remove the black wire of the "rescue car".
Remove the black wires from the 'rescue vehicle'.
(3) Then remove the red wire of the "rescue car".
Finally, remove the red wire from the 'rescue car.'