Main Technical Specifications:

   Measurement Range: 0~9990us/cm
Resolution: 1μs/cm
Accuracy: ±2%F.S
Working Voltage: 2*3V (CR2030 Battery)
Operating Temperature: 0°C～50°C
Calibration: 1-point calibration
Volume Dimensions: 150mm * 27mm * 20mm
Weight: 46g
Steps:
1. Remove the protective cover.
2. Lightly touch the "ON/OFF" switch to turn on the power.
3. Insert the conductivity meter into the solution to be measured until the liquid reaches a position slightly below the 'immersion line'.
4. Gently shake the instrument until the reading stabilizes and then read the value.
5. After use, press the "ON/OFF" button to turn off the power. Clean the electrodes with distilled water and cover them with a protective cover.