【Functional Description】

1. Probe: Test salt concentration.
2. Seven red LEDs indicate the salt concentration as follows: 0.3% to 0.6% (Moderate); 0.8% to 1.0% (Strong); 1.3% to 2.0% (Very Strong).
3. 1 green LED for power indicator.
4. ON button: Press and hold the button to turn on the power and begin the test. Release to stop the test..
5. Check if the probe of the salt content tester is clean, if not, please clean it with neutral cleaner.
6. The soup base temperature should be between 60-90 degrees, insert the probe into the object to be measured, for about 8-10 seconds. When the thermometer detects the corresponding temperature, the result will be accurate.
7. Press the ON switch of the salt content tester, and watch the Power indicator light turn green. If it doesn't light up, it means the battery voltage is too low and a new battery needs to be replaced.
8. Insert the salt content probe into the solution at least 2CM, and maintain a distance of at least 1CM from the container wall for testing. After the display stabilizes, read the last read value of the bright red light, which is the detection value.
9. After the test, clean the probe part of the salt content tester with neutral cleaner.

【Performance Specifications】

• Power Input: 4×1.5=6V LR44×4
• Working Current: MAX 20mA (All LEDs Bright)
• Dimensions: 212×24.8×15.4 (mm)
• Weight: About 36 grams
• Measurement range: 0.3%～2.0%
• Temperature range: 60℃～80℃
• Calculation formula: Salt content = Total mass × Concentration

For example, if the total mass of a solution is 150g, and the concentration is 0.5%, 150g × 0.5% = 0.75g.

Quantity: 100PCS External box size: 37.5*31*57.5CM Gross weight: 9.5KG Net weight: 8KG

                   
【Maintenance and Care】
 【清洁】

• Please clean the probe part of the machine with clean water or with a cloth dipped in neutral detergent.
• Do not use water to rinse or clean the main parts of the machine with a cloth dipped in neutral detergent.
• Please do not use alcohol, diluent or gasoline to clean the probe and main body parts of this machine.

【Store】

1. Prevent falls or strong vibrations, as they may cause a fault in the salt concentration tester.
2. Should avoid high temperatures, direct sunlight, and humid places.
3. If you do not use the salt solution concentration tester for a long time, please remove the battery.