Instruction Manual for Salt Meter

 【Introduction】

 Eating too much salt in daily life can lead to hypertension.

Research shows that daily consumption of10People with a high salt intake have a significantly increased risk of developing hypertension. We should consume less than 5 grams of salt per day.10A salt meter uses conductivity testing to measure the salt concentration in liquid foods. It can effectively control the daily intake of salt, helping to maintain better health. The salt meter includes a touch button, seven red indicator lights to show the salt concentration, and a green power indicator light. It is easy to operate and simple to use. It will be a great health care tool for you.

【Component Description】

probe

Work Site

Operation Display

Power indicator light

Button

Battery cover

 【Measurement Value Explanation】

Please refer to the salt meter for the marking.的功能描述。

MeasurementProbe: Salt Concentration

7个Red lightLEDLamp;

    0.3%~0.6%（Moderate）0.8% to 1%（浓）

    1.3%~2%Very strong.

onea greenLEDPower indicator light.

“ONButton: Press the button, and the power light will turn on; then prepare for the measurement.

【Usage Instructions】

Clean the probe with clean water before measuring.

Leak a certain amount of liquid from the item to be tested.

Press the power buttonPress the button. The green indicator light will turn on. If not, check the battery power or replace the battery.

insert the probeInsert the probe into the liquid or use a spoon to scoop up the liquid, making sure the liquid covers the probe. Once the indicator light stabilizes, use the highest reading as the measurement result.

 WhenMeasurement completed,Use clean water to clean the probe.

 Specifications

Battery Requirements:4*1.5=6V AG13*4

Load Current: Maximum20mA(AllLEDAll Bright")

Product Size:252*26*15.5(mm)

Product weight: approximately36g

Measurement Range: 0.3%~2.0%

Temperature Range: 60"℃" is the symbol for Celsius temperature scale.~80"℃" is the symbol for Celsius temperature scale.

Formula:Salt content=Total quantity×Concentration

For example: a glass solution with a total mass.150Kg, its concentration is0.5%

150g×0.5% = 0.75g

 Battery Replacement

When the voltage is low, the green power light will not light up. This indicates that the battery is low on charge and needs to be replaced.

Remove the battery cover and remove the four used batteries properly to avoid children's contact (as shown in the figure).

put4Only new batteries are to be inserted into the battery box (as shown in the figure).

clean：

Rinse the probe with clean water or use a neutral detergent.

Do not use water or a neutral detergent to clean the machine.

Do not use alcohol, diluents, or gasoline to clean the probe and the body.

Custody:

Avoid strong vibrations, or the equipment may easily fail.

Do not expose to direct sunlight or place in a humid environment for a long time.

Long-term non-use, please remove the battery.