single handle riveter portable single handle riveter riveting gun pull-setter pull rivet riveting gun

Usage Method:

Used for pulling rivets of aluminum or aluminum alloy. Suitable for: rivets with a diameter of 2.4mm, 3.2mm, 4.0mm, and 4.8mm. The rivet gun is equipped with the above four specifications of pulling rivet heads.

Instructions: 1. Select the appropriate pull-tapping head based on the diameter of the threaded rivet. Use a wrench to tighten it onto the clamping sleeve.

2. Insert the rivet pin completely into the hole of the pull rivet head.

Insert the rivet body of the pull-out rivet into the pre-drilled hole.

4, repeat the compression of the handle until the nail rod is pulled out, and the riveting is completed.

After-sales service
1. If you encounter any problems during the purchase process, please contact us by phone, QQ, or email. We will discuss with you various issues encountered during the shopping process.
2. If the goods are not received on time within one week, we will immediately check upon receiving the customer's inquiry and provide the most timely response to the customer regarding the corresponding issues.
3. If any damage occurs during transportation, we will not assume any responsibility for the loss, but we will do our best to pack the products carefully and communicate with the freight company to minimize the risk of transportation damage.
4. We deliver the goods in a timely manner, and we do not assume any responsibility or compensation for losses caused by the delay in the delivery time of the freight company.
Shopping Terms and Conditions
Due to the camera shooting and computer display reasons, there may be color differences between the actual goods and the pictures. If you have any requirements for the color, please contact us in advance. Otherwise, we consider it acceptable to accept the possible small color deviation. Please understand the inconvenience and forgive!
Due to the large fluctuations in raw materials, coupled with the competitive malignant quotes from peers on the internet, our product prices cannot be displayed precisely to customers. The prices marked here are for reference only! Please contact us for confirmation! The slicing machinery blades are mainly used for longitudinal cutting of items such as paper, tape, tape, film, gold, silver, copper, aluminum, and alloy foil. These high-grade metal foil materials require high precision, no burrs, no indentation phenomena, so the difficulty of slicing is larger. Therefore, the precision requirements for longitudinal and transverse cutting knives are higher, the cutting resistance is minimum, the wear resistance is maximum, and the cutting edge is sharp for a long time. To address this challenge, our company has introduced the most advanced CNC grinding machines from the international market and has hired knife technology experts. After long-term research and development, we have developed replacement high-precision micrometer-level longitudinal cutting knives. We have also applied high-tech technology to ceramic composite blades and carbonized tungsten coating on the blade surface. This way, the blades are less prone to wear and do not stick to powder during slicing, reducing friction during slicing, solving this problem, greatly improving the precision and speed of slicing, and extending the service life of the knives. The success of this knife development has saved users a large amount of costs and foreign currency.