CO2jet machine

 Ned:

The equipment working on power is prohibited.

It must be wired safely to meet the standard.

Please install a specialized line for the machine in the ground.

It must be operating the gad steel bottle user standard.

The nozzle must not face the human and animal.

Confirm the system connection, then connect electricity and gas. Maintenance is required.

2. The following damage situation is not within the free service scope:

(1). Incorrect transports, installs, uses, and arrange.

(2).Privately dismantle the product.

(3).Abnormal voltage, fire, etc. due to external reasons.

(4).Other unavoidable reason such as thunder

产品特点和技术参数;

(1). Spray large amount of smoke, and the spray distance of up to 5-8m,

(2).It has a high compatibility, easy to operation.

(3).Voltage:AC220V(10%),"one-way for power.

(4).Pressure:15MPa.

Structure illustration

two.System connection

Please check the packing case is complete or not before open it. Notice the shipping company in time when finding the packing case is damages in transit. And keep the damaged case as evidence, so that to make claim with the shipping company.

Products Packing List:

1. A Large CO2 Gas Column

2.A control cable

3.A high pressure tube (6 meters)

4.A Instruction

Installs illustration:

220V-50Hz

			POWER

                                                          BOTTLE LF CO2nbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbsp

                                       

1.Places the large CO2 column on the corresponding position

2.Connects the gas outlet and the gas bottle

3.Turn on the valve of the gas bottle

4.Put down the bottle and keep it flat

5.The wire is attached to the High-Pressure Pie. One end of the wire is firmly fastened to the machine body, and the other end is firmly fastened to the bottleneck.

6.Connect the machine and the console.

7.Before disassembling, firstly turn off the bottle valve, let out the gas which remains in the pipe, then turn off the power, lastly separate the connector of the gas bottle.

Attention:

1.The bottle must be put down and kept flat. Otherwise, the gas column can't rise.

2.The trachea connection must be sure link.

3.When not using the machine, the nozzle and the steel bottle intake must be covered, to prevent the entry of other objects.

three.Use manual

Operation method

Wire-control: Connect the power, and press the power control switch, the CO2 gas column will rise immediately.

DMX512 signal control: Press the "DMX" switch, there are two channels under the DMX512 signal environment. After connecting the DMX512 console, pressing the first switch will continue 1 second CO2 column; pressing the first and second switch together, will continue 3 seconds C02 column.

Attention:

The CO2 column squirt time cannot surpass for 3 seconds.

Two jet time intervals cannot be shorter than 5 seconds.

Please ensure that all parts of the CO2 column are connected and operational before connecting the power.

four.malfunction"，"obviate" 翻译成英文是 "obviate

Simple malfunction obviate:

1.Press down the switch of power console, cann’t spray CO2 column, Please check connect power or no; the gas bottle have enough barometric or on.

2.Press down the switch of power console, the CO2 column effect not well. Please check if put down the bottle: or the operation environment is too desiccation.

3.If CO2 leaks from the nozzle during operation, please turn off the gas bottle valve, and restart the machine to resolve the problem.

five.Special statement:

  The high pressure tube, nozzle and steel wire are damageable, not in the range of maintenance.