The advantages of our nursing bed:

1. Bed frame: Made of high-quality steel welded into shape, the surface is acid washed, phosphated, and then electrostatically sprayed with plastic, making it firm and durable with a beautiful and elegant appearance.

2. Bed board: Made of high-quality cold-rolled steel plate, pressed and welded into shape, the surface is acid-washed and phosphated, then electrostatic sprayed with plastic, resistant to corrosion and easy to clean.

3. Headboard and Footboard: Made of high-quality ABS engineering plastic, which is molded in one piece, with a beautiful appearance and soft colors. It is installed with a latch system, which allows for easy disassembly. The corners are equipped with anti-collision sleeves.

4. Casters: Featuring four-corner full-braking medical-grade silent swivel casters for stable locking, making it convenient for movement and indoor cleaning (standard equipped with stainless steel casters).

5. Manual Standing Function: By operating the handle, the back can be raised within a range of 0-75 degrees, which is convenient for the patient's daily life.

6. Manual lower leg flexion function: It allows for lower leg flexion when the patient sits up, conforming to the principles of human engineering. It is convenient for washing feet and soaking feet in bed. The angle of flexion can be adjusted freely between 0-75 degrees.

 7. Manual toilet function: A hole is set in the center of the bed for easy patient use while lying down. A pull-out handle at the bottom of the bed is convenient and quick.

 8. Bedside Shampooing Function: Equipped with an embedded plastic shampoo basin for convenient bedside shampooing. (Recommended to use after raising the bed board about 15 degrees).

The 2014 model adds more than 20 new welds to the key areas, using more durable and robust materials.

The 2013 model added a lower bending leg control rotary latch, which allows for further stress distribution on the leg bed board.
 
The mattress is a 6cm mattress (4cm palm mat + 2cm sponge), which has better ventilation.

13. Other accessories: 4 high-grade silent wheels, 5-speed aluminum alloy guardrails, dining table board, shampoo basin, and toilet

Instruction for Nursing Bed Installation
1. Due to transportation reasons, we are unable to send the beds fully assembled to the customer. Therefore, the buyer needs to assemble them themselves.
2. Installation is very simple. The main mechanical transmission parts have been installed and adjusted upon delivery. Customers need to install the bed legs screws themselves, a total of 8 pieces. The screws have been provided on the bed frame. Additionally, 4 guardrail screws need to be installed, and the screws for the guardrail are also provided on the bed frame. There is also 1 toilet seat fixing screw provided on the bed frame. (A total of 13 screws).
3. The headboard is a dual-lock snap-on design with built-in anti-tumbler pieces. The larger one is the headboard and the smaller one is the footboard. Please make sure to distinguish them.
4. The casters need to be installed on the bed legs. Before installation, press the brake lock piece down first, and then install. Otherwise, the casters may not be installed due to rotation.

Instructions for Installing a Home Multifunctional Care Bed:
1. When the need for left-right side-turn function arises, the bed surface must be in a horizontal position. Similarly, when the back position bed surface is raised or lowered, the side position bed surface must be lowered to a horizontal position.
2. When using a wheelchair or for foot washing, it is necessary to raise the back of the bed. Please ensure that the bed surface for the thighs is raised to the appropriate height before raising the back of the bed, to prevent the patient from slipping.
3. Do not drive on rough roads, and do not park on slopes.
4. Apply a small amount of lubricant to the lead screw nut and pin shaft areas annually.
5. Please regularly check the activity shafts, screws, guardrail set screws, to prevent looseness and disengagement.
6. Prohibited from pushing and pulling pneumatic springs.
7. Please do not operate the drive components such as lead screws with excessive force. If any malfunction occurs, please repair and then use.
8. When raising or lowering the footrest, first gently lift the footrest upward, then pull the control lever, to prevent the lever from breaking.