Product Name: WS8888 Fire Tail Exhaust

Product packaging: Individual white box packaging

Packing Quantity: 100 pieces

Volume: 0.09 cubic

Product Description:

  The tail pipe is equipped with a super bright light body, which is made of reinforced and thickened design with imported light sources. It is fire-resistant and has undergone destructive tests (ordinary lights explode when exposed to fire, as the temperature of fire is far higher than that of the exhaust pipe, and the light body contains aerospace insulation materials and high-temperature chemical materials, etc.), ensuring safety. Please rest assured to use. The rear end of the tail pipe is equipped with a sound-absorbing air dispersal mesh to reduce the sound and make it softer. The gas hitting the light body's back pressure cap can assist the engine operation to a certain extent. The gas combined with the high-intensity light before the tail pipe can produce a spraying effect. The tail pipe has undergone 48 processes to create such a spraying device, so the cost is also very high. It is not as simple as just placing a light. It uses aerospace insulation materials, chemical materials, and special high-strength light bodies, which are very expensive and are not profit-seeking products. The profit is also very thin.

The product is universal, choose the straight if the car's exhaust pipe outlet is straight, choose the curved if the outlet is curved, installation is simple, and it can be connected to any car's power source.

Installation Instructions:

Direct fitting: Just install it directly; if there is too much exposure, you can cut off a section of the exhaust pipe.

"Bent mouth:

Fit directly on the appropriate one, if the length of the bent pipe of the exhaust pipe is not suitable, the straight pipe after bending can be lengthened or shortened, and then install it after connecting, and pay attention to ensure that the screws are tightened or use a welding machine to reinforce and weld.

Notes:

1.When installing, be sure to avoid blocking the exhaust opening against the inside fire hat, or it may affect the exhaust.

2.When wiring, wrap the connectors and the outlet of the wires with tape to prevent short circuits or for the long-term vibration of the exhaust pipe, the outlet of the wire may break off. First, connect one wire to the grounding or negative terminal on the body, and then connect the other wire to the rear brake light, the rear turn signal, or the accelerator pedal with a contact switch (the sequence cannot be reversed). Do not use water to wash the lens in the tail pipe when the car is hot. And do not install the tail pipe line too tightly, there should be some play because the exhaust pipe is vibrating, even the strongest wire may break. If the wire breaks, there is no guarantee. If the installation leads to loss or any consequences caused by wiring, the manufacturer will not be responsible!

Function Introduction:

  Car sprayer, the combination of strong light and gas creates an unexpected simulated real fire effect, making your car's popularity 100%. This product can assist in engine back pressure, reduce noise, remind the following vehicles to maintain a safe driving distance, prevent rear-end collisions, enhance the clarity of reverse parking, and is aesthetically pleasing.

Generous...