[] gifts

to buy the machine, the package will package, give the value of 160 yuan gift package, beyond you, try machine practiced hand opportunity for you to avoid wasting your own supplies. We have a full set of heat transfer solutions, so that the novice is not worried, so that the beginning becomes simple, so that it is easier to start.

> Equipment Description:
device name: ordinary flat machine
device number: M5040

> > product features:
* digital time display, electronic time controller with high precision. pointer.
* heat pipe and the heating plate as a whole, safe and durable, heat distribution.
* electronic time control, signal process complete instructions.
* pressure adjust.
* bottom plate is provided with high quality foam silicone.

> > technical parameters:
voltage: 110V/220V
power : 2200W 2800W 3500w
temperature range: 0-399 degrees
time control: 0-60sec
size: 38*38 40*50 40*60cm
packing size: 73*48*43.5cm 83*61*43.5cm 81*71*44.5cm
weight: 25kg 30kg 36kg

> > application:
> > read before use:

(1) to determine the operation using safe ground.

(2) before use to check voltage. Turn off the machine, cut off the power.

(3) when you use it, to avoid the empty heating time is too long. Please cut off the power when you don't use it. You can also put a piece of scrap products on the machine table, in order to avoid the air heating machine

(4) when you operate the machine, avoid touching the pressure spring, to avoid injury.

(5) when you press the handle, if you feel too much pressure, and it is difficult to press down, please adjust the pressure regulating knob, reduce the spring contraction, or the strength of machines will be damaged.

(6) even when the machine is not in use, do not let children close to the machine.

< span style= paper, wait for 5-10 seconds, then tore up the transfer paper. If it is hot peel transfer paper, you can immediately tear up the transfer paper after transfer.

Please need the right time to pay attention to the success of the printing, temperature and pressure, the clothes and the thickness of the material, or even the type of transfer paper will also affect the print effect. Please contact your supplier for information.

> > maintenance:

1. if the pressure is not enough or too much pressure, please adjust the nut (+) and (-) direction of pressure; reducing the pressure direction of.

2. time: when the time is complete, the alarm has no beep or no indication, check the connection of the induction switch in the rear of the machine. If the position is not correct, please adjust it to the appropriate position.

3. temperature: if the machine has been running for a few minutes, the heating plate is not heated, check the circuit.

4. if there is any quality problems, please contact our company