the company Youku operation video demonstration area, http://i.youku.com/tongkai copy this link to the IE browser to watch)

[] customer service service

1. lifetime maintenance (non-human damage).

2. lifetime free to provide technical guidance.

Not for 3. Photoshop customers, we provide professional guidance .

[] reminder

if you need to order other thermal transfer supplies, can contact the company to ask for more detailed quotation! Can also call the Advisory: 0579-85139739

attention : before using the machine, please carefully read the instructions on the operation warning, the replacement of the heating parts, please shut down first and pull to the general power plug, hot stamping head connecting plug and an electric control box connected socket must be aligned, electric control box not connected heating components never boot. Machine can't burn.

[usage]

this machine can be any color color, portrait, landscape pattern in printed crystal products, particularly suitable for advertising, gifts, promotional activities, but also can be used as a personalized gift to friends and family, and art appreciation and practicality in one.

[features]

The use of 1. ultraviolet main source of light, can make the UV crystal dehydration fast curing, and no harm to human body.

2. spectra of concentrated, can cure quickly on the UV glue , compared with the conventional black and purple UV light energy efficiency 3 times.

The operation process of a key type 3. , appearance easy placement, durable , energy saving and high efficiency, high safety , convenient and durable.

[] technical parameters

The number of UV lamp: 4

- voltage: 220V frequency: 50HZ / 110V / 60 HZ

- power: 50W

- packing size: 550mm x 550mm x 220mm

- weight: 11kg

- real-time temperature display status: automatic alarm

[show]

[show] details

[gift] printing process

1. have good selection of image processing, print, print out the same transparent film drying, or use hair dryer heat drying, the total process to keep the film drying.
2. The clean crystal surface have been prepared to do, and then pour the UV adhesive, print out the pictures on the crystal surface, out of the bubble, in curing machine. Note: the cure should be crystal up, with the film that face down, but the bottom should be the bottom of a flat object. 3-5 minutes can be removed. The excess glue with a clean cloth Sassafras test, the reverse come up again in the film curing machine to enhance curing).
3. 3 minutes can be removed, with a knife gently cut along the edge of the crystal film (film on a thin layer of membrane), and then can be torn down, this time should be convenient, clean cut film a slightly larger than the crystal objects. Put one side to the side.
4. above work is completed, it should be trimmed, which is along the crystal face with a knife cut off excess cured glue, smooth, beautiful, the trimming operation process, the knife should be tilted down crystal surface repair.
5. repaired the edge, the crystal glaze into the image transfer just good, at this time, you will find that the glue is thick, it is normal (then, put aside the clean cut film (film the surface) were posted up, gently hanging flat, operation process to ensure the surface hard glue in place to heal, if you want to make a finished surface more smooth, then can use the thin glass slices the film paper gently pressure test, let each plane get uniform glue.
6. Do all the work above, can be cured in crystal machine, it is also the crystal face, put the film face down, but the following should be planar objects fall at the end. 3-5 minutes can be removed. The excess glue with a clean cloth Sassafras test, the reverse over the film up again to deepen curing, usually around 4-5 minutes to remove, because the glue hardness has not reached 100%, then can facilitate trimming, after removing the same knife edge cut of the film along the crystal tear, trimming at this time, you will find the film this film has been printed. But don't tear down the film at this time. Once again into the oven, so that the light can be fixed. The last step is to use a knife to gently tear off the printed film. At this time, you will find the crystal surface is very smooth, smooth.

[] reminder

printed character of DIY products, you need to prepare the following equipment and materials:

1 , crystal machine equipment;

2 , inkjet printer + ( will be empty even for thermal transfer ink into the tx800fw);

3 , sublimation ink (to be installed inside the printer in );

4 , high temperature adhesive tape;

5 , transparent film;

7 , paper cutting knife;
which printer advise customers to the local market to buy Epson R230, printers need after-sales place more, in the local is more convenient. The following :

[CE] product certification

"CE" logo is a safety certification sign is seen for manufacturers to open and to enter the European market for passport. CE on behalf of the European unity (EUROPEENNE CONFORMITE). Those labeled "CE" logo products can be in the EU domestic sales, not required to meet the requirements of each member country's, so as to realize the free circulation of goods in the EU member states within the scope.