X Email Mobile
| Number | Unit-price | Total | |||
| I want to buy： | × | 20.0 | = | 0 |
A new item has been added to your Shopping Cart. You now have items in your Shopping Cart.
The existence of hot melt adhesive Limited company 13yr.
Main Products:Hot melt glue sticks,hot melt glue gun,rubber,adhesive furnace,soldering iron,tape,double sided tape
Contacts:MISJIANGChat
Mobile:86-13575964028
E-mail: WeChat:13967428785
Address:40860A, 5 Street, 3 F, 77 Gate, International Trade Mart (District 4).
Related items
3, Unique filter mesh design with excellent filtering performance, easier to clean and replace. Spray nozzle is less likely to clog.
How to Properly Use a Hot Glue Gun
1. Before plugging in the hot melt glue gun, please check if the power cord is intact and the stand is ready; if the used glue gun has any problems such as glue leakage.
2. Before using the glue gun, please preheat it for 3-5 minutes. When not in use, please stand the glue gun upright on the desk.
3. Please keep the surface of the hot melt adhesive tape clean to prevent impurities from blocking the nozzle.
4. If the glue gun fails to discharge glue during use, please check if the glue gun is hot.
If the hot glue gun does not work normally, the reason may be:
The glue gun power supply is not plugged in correctly.
The glue gun burned out due to a short circuit.
Under normal heating conditions, the reason may be:
1. The nozzle of the gun is blocked by impurities, which should be handled by professionals.
When the glue gun is used to pour glue to make the glue strip thicker, you can simply rotate the glue strip gently for a full turn and carefully pull it back slightly. Peel off the thickened part of the glue strip, and then continue to use it.
5. Avoid using the soldering iron in humid environments, as humidity can affect the insulation performance, which may lead to electric shock.
6. The nozzle and the hot glue are extremely hot (approximately 200 degrees Celsius), so it is not allowed to contact any other parts except the handle.
7. Do not pull the adhesive tape out of the adhesive inlet, as hot melt adhesive can cause severe burns or damage to the hot melt gun.
8. Do not disassemble or install the parts of its electric heating section at will, or it may cause malfunction.
9. Do not allow children to touch, and store in a place out of their reach.
10. Except for melting glue, it should not be used for any other purpose.
11. If the hot melt adhesive in the glue gun reverses, immediately stop using it. Only after the professional personnel cleans the reverse hot melt adhesive can it be used.
12. If the hot glue gun is continuously heated for more than 15 minutes without use, please turn off the power.
Update time：
TOP
