Material: ABS
product net weight: 204g
gross weight (with packaging): 320g
dimensions: 9*5*16.5cm
packing: 14*6*20.5cm
packing size: 65*43*43cm 60 PCs/box
weight (with box): 20.4kg

1: there are two air conditioning

refrigerating and ordinary fan mode
Namely: fully random distribution with a sponge wetted (do not drop for the standard) into the sponge behind the machine within the restricted areas. Turn on the air conditioning, air cooling can be realized
If you do not need refrigeration, the sponge out, continue to open air conditioning is not a cold wind blowing out
products with water absorption of wood pulp sponge can be reused!

2: power way
air conditioning of power way has three species
1, and 4 section 5th, battery power (needed since distribution)
2, and USB interface power (random distribution USB line a article)
3, and power directly power (AC adapter needed user owned)

3, and note matters
a,: products for not waterproof products, sponge added water Shi should out Hou again added water. Do not direct water injection to prevent water entering the machine internal damage
b: sponge fill drop humidity prevail. After too much immersion can be screwed into the machine inside
c: product resistance to falling from a height, please note that when using
d: it is recommended that after each time you use your sponge to dry sponge to avoid bacteria and odor.

Tip: If you need to blow it out of the air with fragrance, you can add a few drops of essential oil to the sponge is OK. Of course, after use be sure to immerse in water for cleaning dry again!

Battery of installation
battery grid is located in handles Shang, in hand with of next
1) down sliding and removed battery grid of cover
2) install 4 section new of AA alkaline battery
3) again cover Shang battery grid of cover
4) long-term not using Shi please will battery out
can add-ins power, add-ins power device of DC socket is located in hand with of Shang interface at
1) will we configuration of can alternative power device of DC plug insert socket mouth
2) connected to the household power supply can be used when there is no battery status with cold

Installation of water cooling sponge
1) turn the machine off
2) by pushing the top lever to pull, sponge sponge cover together with the water removed
3) used for the first time: a sponge soaked in water with SOAP water thoroughly rub. Please be careful with the sponge, don't wash it too hard.
4) if the water of the sea was last used is left, sponge, please remove it from the lid, squeezing out remaining water.
5) sponge sponge flat on the water cover at the same time operate according to the following description: in a bottle filled with tap water, distilled water or mineral water, and then slowly pour the water in the entire surface of the sponge 30ML.
6) Insert socket, on sponge sponge cover together with the reinstall, and then put the CAP into the host so that it locks.

Note: do not over soak water sponge. Stop flowing water below making sponges. Have a good soaking with 30ML water is difficult, please always use water bottles.

Note: machine is not waterproof, please avoid external contacts other water.

Note: If the leak occurred in the operation, then there may be excess water you pour in the sponge (see the fifth step) or likely not before you soak a sponge out remaining water previously.

Operation
host above the battery lid has two switches:
1) snowflake switch can control the machine power and air coolers air speed
2) lighting switches can control the LED light at the top of the machine (temporary lighting for night-time travel device)
3) on the machine, click on the snow switch, motor runs at low speed. Then click on, motor show run (speed can be adjusted by environment)
4) air adjustable air output direction of rotation, easy to bring you a better cooling effect
5) when cold air reduces re-soaked sponge, "as described in the installation instructions for water sponge". Open touch sponge sponge cover make sure sponge is dry. Use time arising out of the use of different and vary depending on environment (about half an hour to 3 hours)
6) touch the sponge on a regular basis to make sure it is still wet, sponge dry, again soaked sponge

Note: to make effective cold air, wet sponges must be, if not, please follow the installation instructions for water sponge.
Maintenance water sponge
after each operation, follow the instructions to remove the foam cover, squeeze out sponge excess water, place the sponge to dry in the air.

In order to achieve the best results, periodically cleaning your water sponge and antimicrobial soaking before use.

Note: when you SpongeBob make sure that clean hands

Fragrance
has a slight fragrance, you can water cooled the sea surface using your own aromatherapy essential oils. After soaking wet sponge "as described in the installation instructions for water sponge", in the sponge on the surface, add a few drops of the essential oil you want, wash thoroughly after use.
Don't mix with a sponge to smell different.