single color dimmer for led light bar

Aaron LED lighting 11yr.

Contacts:

aronChat

Mobile:

86-15167973154

Click to Contact Yiwugo official customer service for International sourcing.

Yiwugo official customer service X

Whatsapp:

Email： yiwubuy@yiwugo.com

Description

Technical parameters● Working temperature: -20 to 60"℃" is the symbol for Celsius temperature scale.

● Supply Voltage: DC5V, 12V, 24VOptional (order with required voltage specified)

● Output: single"回路"可以翻译为 "circuit".

● Dimensions: L90ΧW60CH35mm

● Net weight:80g

● Output Current: <8A

● Output Power: 5V:<40W,12V:96W,24V:192W

Dimensions:

Controller size:

undefined

"旋钮式"可以翻译为 "knob-style".Single-channel dimmerLink diagram:

undefined

Instructions:

1First connect the load line, then connect the power line; Ensure there is no short circuit between the connecting lines before turning on the power;

2Adopt a rotating control, only one load output, the function of the knob is as follows:

When the knob is rotated clockwise, the color and brightness of the lamp gradually increase, and when it is rotated to the end, the brightness is maximum.

When the knob is rotated counterclockwise, the color and brightness of the light gradually become dimmer, and when rotated to the end, the light turns off.

Fault Analysis and Solution:

Fault Phenomenon	Reason Analysis	Solution
The light doesn't work.	1. The switch power supply is not working. 2. The positive and negative lines of the power supply are connected in reverse 3. Pressed the wrong wire or not connected firmly	1. Check the switch power supply 2. Check and correct it. 3. Check the wiring and connect it securely.
The color is wrong	RGB cable is connected incorrectly	Recheck and reconnect the RGB wires.
The pattern does not change.	The speed hasn't been set correctly.	Press the speed key to increase speed.
before and after LED brightness unevenness	1. Output line has too much voltage drop 2. The wire diameter is too thin, causing a voltage drop. 3. Power load overload 4. Controller Load Overload	1. Shorten the circuit or provide power in a ring shape. Calculate the current and replace the thicker wire. 3. Change to a more powerful power supply 4. Increase the power expander
Warm Tip: The effective power of switch mode power supply is only 80% of the rated power, so when choosing the power supply, the user should select a slightly larger power than the LED load, at least more than 20%.

Update time：20240429215702