1. Before use, first set up the support (support angle can be adjusted).
2. Insert the glue gun nozzle into the rear of the glue gun, and turn on the power.
3. Press the finger several times until the glue stick is securely fixed in the glue gun nozzle!!!
4. Wait for the glue gun to heat up for about 5 minutes before using it.
5. Hold the hand tightly until the adhesive liquid flows out of the nozzle.
6. After use, turn off the power, no need to clean the nozzle, and no need to remove the adhesive tape.

7. During use, if a whole roll of adhesive tape is not used up, do not remove it. You can plug in the power and preheat it for 5-8 minutes before using it again.

Notes

1. This product is a high-temperature glue gun. If the user uses glue strips of incorrect size or type, it may cause the glue to reflux and damage the glue gun.

2andThe nozzle of the sol gun and the melted glue strip have high temperatures, so do not touch them with your hands. It is prohibited to use it in places with flammable and explosive materials.

3. When using a glue gun, do not lift it high, and the nozzle should not be pointed upwards. If no glue is applied for 15 consecutive minutes, please turn off the power to prevent the glue from melting backwards and damaging the glue gun.

4. Due to the addition of durable materials in the glue gun, there may be smoke emitted during the initial use. After 30 minutes of use, the smoke will automatically dissipate.

5. It is necessary to maintain the cleanliness of the gun tail slider frequently to ensure that the adhesive tape can be smoothly inserted into the gun barrel. It is prohibited to pull the adhesive tape out of the adhesive gun from the rear.

6. When the glue gun is not in use, it should be placed in a place with good ventilation and dryness, and it is prohibited to place it in a place with moisture or water. It is also prohibited to place it in a place where children or children can reach.

7. This tool must be placed on its stand when not in use!