Room temperature curing is fast, with a 5-10 minute set time, and the material reaches useable strength in 30 minutes. The maximum strength is achieved 24 hours later.
Easy to use, no strict measurement required. For example, two components can be applied separately, which can extend the service life.
High shearing, impact, and peeling strength, good overall performance, steel/steel tensile shear strength at room temperature > 20 MPa; impact strength > 2.0 J/m2.
Can be bonded to the oil surface. Just grind, no need to remove fat, and the strength does not significantly decrease.
Good acid and alkali resistance, good water resistance, and excellent oil resistance.
Resistant to heat and humidity and atmospheric aging, with good durability.
Easy to clear.

Product Usage:

This product is a structural adhesive, mainly used for rigid bonding, and can be used for steel, iron, aluminum, aluminum alloy, titanium, stainless steel,
ABS, PVC, Nylon (Polyamide), Polycarbonate, Organic Glass (Poly(methyl methacrylate)), Tempered Glass, Polyester
Adhesion between the same or different types of materials such as resin, polyurethane, cement, ceramic, wood, laminated boards, etc.
Adhesive glass products have good initial strength, but due to the large expansion coefficient of glass, they sometimes automatically detach.
Not applicable to products such as snowflake iron, copper, brass, zinc, cellulose acetate, polytetrafluoroethylene, polyolefins, polysiloxanes, etc.
The adhesive bond.
The adhesive effect of the flexible adhesive is not satisfactory.
Mainly applied to the following aspects: automobiles, motorcycles, machinery, chemical pipeline, storage tanks, woodworking furniture, lighting labels.
Card, daily life, scientific research, etc.

【Parameters】：

◆ This product is a structural adhesive, mainly used for rigid bonding, and can be used for the bonding of steel, iron, aluminum, aluminum alloy, titanium, stainless steel, ABS, PVC, nylon (polyamide), polycarbonate, organic glass (poly methyl methacrylate), tempered glass, polyester resin, polyurethane, cement, ceramic, wood, laminated boards, and so on, between the same or different kinds.
◆ Adhesive for glass products, initial strength is good, but due to the large expansion coefficient of glass, it may sometimes automatically peel off.
◆ This adhesive is not suitable for bonding products such as snowflake iron, copper, brass, zinc, cellulose nitrate, polytetrafluoroethylene, polyolefins, polysiloxanes, etc.
The adhesive effect of the flexible adhesive is not satisfactory.
◆ Mainly applied in the following aspects: automotive, motorcycles, machinery, chemical pipeline, storage tanks, woodworking furniture, lighting labels, daily life, scientific research, etc.