B6000 glue DIY sticking drilling special repair tools must be 9ml with a needle wholesale

Product name: b-6000 glue

Unit of measurement: piece = branch

Capacity: 9 ml

Color: transparent

It can be used for pasting various articles with super adhesive force

AntoinoB6000 self - leveling adhesive is a suitable toy, flower, accessories. Compared with other adhesives, AntoinoB6000 has a slightly pungent odor and a pleasant aroma of Dan Dan Dan. It is a new type of transparent solution adhesive with a single component. It can be cured at room temperature. High elasticity, soft film, anti - vibration and waterproof. AntoinoB6000 adhesive can paste more material, it in metal, glass, ceramics, stone, bamboo, wood, cloth, leather, PE, PP, PVC, ABS, nylon, foam, film, fabric, electronic components, plastic, rubber, fiber, paper, and other materials have good adhesive performance.

Solid content: 30%-35%

Hardness after curing: 65-80a

Surface drying time: about 3 minutes

Full curing time: 24-48 hours

Save: save at 10 to 28 degrees

Net content: 110ML large branch and 25ML small branch

[B7000 technical data]

Appearance: transparent semi-fluid

Solid content: 28-35%

Hardness after curing: 65-80a

Surface drying time: about 6 minutes

Full curing time: 24-48 hours

Save: save at 10 to 28 degrees

Net content: 110ML large branch and 25ML small branch

 Usage:

1. Please read the product description carefully before use

2. Before large area use, please do small area experiment first

3. Please make sure the surface of the adhesive is clean and dry

4. The optimal operating temperature should be between 18 and 32 degrees

5. After opening the cover of the product, please remove the residual glue on the cover needle in time to close the cover

6. Wait for 1-2 minutes. Aim the two adhesive objects at the adhesive for a little pressure

7. Keep it straight for a few hours and reach the best pasting strength after 48 hours

8. When the product is not in use, the bottle cap shall be put in place to prevent the glue from curing after contacting the air

[notes]

It may irritate the skin and eyes

2. Please use in a well-ventilated environment

3. If contact with eyes carelessly, please rinse with plenty of water

4. Please keep away from children's storage and production operation away from fire

5. The warranty period shall be one year, and the safe use date shall be at the end of the product tube

Phone beauty, jewelry by hand by hand necessities, high performance glue, glue after the drill will not hurt the bottom of the drill and the bonding surface (not damaged by the surface of the adhesive material), even a bad stick drill, instant pull down also can stick again, the glue is gelatinous, not in the bonding surfaces turbulence. When used, even if the glue is on the drilling surface, the drilling surface is not afraid of contamination, and can be easily handled clean drilling surface. Another thing is that the glue is harmless to the human body, and prolonged exposure will not damage the skin.

Note: it takes 24 hours to dry completely. The wire-drawing phenomenon commonly seen in gelatinous glue can be removed by wiping with a cotton swab before it is dry enough

It can be placed in the sun or under strong lights for a while, which will dry faster

B60 million glue is a kind of synthetic rubber adhesive made by special formula, which not only provides excellent bonding strength, but also has flexibility. It can adhere to metal, glass, rubber, plastic, fabric and other materials with high strength. These characteristics make it widely used in equipment maintenance, handicrafts, decorations, household glue, etc.
Typical features and USES:

1. Drilling professional bonding

2. Repair ceramic and wood figurines

3. Replace the broken pieces on the broken glass

4. Metal assembly handicraft design

5. Repairing garden and garden statues

6. Repair cracks and cracks in the wooden frame

7. Rebuild the damaged edge Angle

8. Fill the nail holes and drill holes

9. Attach ceramic pieces to wood or metal to concrete

10. It can be used in busy traffic areas as a protective layer of contact surface.

11. Good acid and alkali resistance, and can be used as corrosion protection coating in acid and alkali environment (such as salt water or sulfuric acid).

12. Insulation performance: excellent dielectric insulation and resistance, suitable for electronic equipment.

Not flammable.

14. Others: high impact resistance and will not shrink, burst or solidify during the molding process without vertical flow. After curing, the B6000 can be polished, ground, filled, hammered, cut and drilled, and can sweep most of the paint. Can be molded into any shape to replace damaged or missing pieces. Can be raised and vertical construction, not vertical flow. Easy to mix with color, with powder coloring, most water-based colorants and food dyes.