B - 7000 adhesive (automatic flow flat) is a kind of the use of special formula manufacture synthetic rubber type adhesive and sealant, the single-base compound multi-purpose industrial adhesives and sealants, B - 3000 adhesive of numerous material surface with a strong adhesive force, and the cured with high elasticity, make the glue or seal a common ideal with glue on the surface of the material.

 

B - 7000 than silicone adhesive, c dilute acid and rubber adhesive is not easy to corrode, more waterproof, impact resistance, ageing resistance, resistance to dilute acid and alkali, etc., especially for underwater or cold environment with glue more protruding its excellent quality, suitable for metal, glass, crystal, rubber, plastic, ceramic, nylon, fiber, leather fabric, polystyrene foam, polystyrene, polyethylene, polypropylene type plastic and other materials, these characteristics make it more widely used in equipment maintenance, handicrafts, jewelry, toys, household items, toys, clothes, textile and other industries.

 

2. Product features
Adhesion properties: the ability to permanently adhere different materials, super adhesion and adhesion.

Sealing property: seal and seal off the flow of gas, liquid and air. Keep excellent adhesive strength in underwater environment for a long time.

Shock resistance: highly elastic, stretching up to 900% of its own length without breaking, effectively adhesive the surface of the material with stretching characteristics, and improve the durability of the bearing structure.

 

Technical parameters
Not cure:
Solid content: 33%--45% (weight)

Hardness after curing: 75-90a

Table dry time: about 4 to 6 minutes positioning

Full curing time: 24-48 hours

Save: save under 10 ℃ to 28 ℃ temperature

Viscosity: 2800mpa, s

Gelatin: fully transparent, soft glue, medium and high strength

Temperature range: -35- -90 degrees

Features: no white hair, no yellow hair, no hard hair, low wiredrawing, ultra-low smell

Packing specification: 15ml, 25ml, 50ml, 110ml

Shelf life: 18 months

Iv. Methods of use and matters needing attention

1 read the manual before use. Please use in a well-ventilated environment. The adhesive surface should be clean, dry and dustless. It is a material that is difficult to stick. Best use temperature between 21 ℃ and 29 ℃, formal small area experiment before use.
2. Apply b-7000 adhesive directly to the surface to be bonded, and leave the adhesive parts dry for 24 to 72 hours for maximum strength. The curing time will be lengthened in cold winter, but it will not affect its bonding strength, and the curing time will be shortened in high temperature environment. Can use hand - held hair dryer to speed up the solidification, should be set at low temperature, not directly to the colloid.
Remove wet glue with acetone or naphtha. The solidified material can be removed or scraped off with a tool.

4. Used for bonding crafts on fibers. Do not dry clean the fibers
5. If you have any questions, you can get further technical support by phone, online questions, messages, emails or by contacting our technical support department.