300M远程宠物训练项圈，防水且可充电

1. Remote range up to 300m;

2. 可充电防水项圈;

3. Completely waterproof, your dog can swim in the water;

4. 4 working modes: static shock, vibration, beep and light;

5. 100 levels of vibration and static with large electric current stimulation, more effective for unruly dogs;

6. Power saving design with automatic standby;

7. Large LCD displays all instructions and LED lights for night lighting;

8. Durable and adjustable TPU strap (length from 67cm to 71cm);

9. The most effective and safest training system with auto-protect mode;

10. Patented design and certificate with CE, R&TTE, RoHS and FCC.

1. Function: Vibration + Electric Shock + Warning Sound + LED Torch

2. Power Supply: Both the remote control and the receiver are powered by charging.

III. Charging Time: Charge for 2-3 hours, and it's ready once fully charged. It's not recommended to charge for a long time. Generally, the receiver will release current quickly. If the battery is low, it will emit a warning sound. It's important to charge in time, and it's best not to wait until the battery is completely empty to charge. This can cause the battery voltage to be too low, which can easily damage the receiver and prevent it from charging.

Section 4: Remote Control Usage:

1) LCD display function: easy to operate, displays symbols for sound, vibration, electric shock, and lighting functions.

2) Adjustable from 0-100 levels for pulse electric shock intensity and vibration intensity, allowing for training of pets with varying intensities from weak to strong.

3) The remote control has an energy-saving feature, which automatically enters a power-off state after approximately 3 minutes of inactivity.

4) Under the condition of no interference obstacles by the sea, the remote control effective distance is 300 meters.

5) The remote control uses advanced transmission technology, so it does not need to be directly aimed at the receiver. The remote control signal can penetrate obstacles such as walls, but obstacles will affect the effective distance of the remote control.

6) A remote control can simultaneously control two receivers. Press the 1/2 key to switch, choose 1: to control the first, choose 2: to control the other. Press the Mode key to switch between sound, vibration, and electric shock. Press the number key to adjust the level, and press the Y key to send the command.

7) With a LED flashlight function, it can be used in the dark or poor lighting conditions.

8) The remote control has a back clip, which allows it to be carried around and hung on a waist or bag.

9) The red indicator light on the remote control will glow when charging or when pressing the Y button.

 5. Receiver Usage Method:

1）The receiver needs to be paired with the remote control to work. Generally, we will perform the pairing for the customer when we send it out. The pairing method is: press the power button once to turn on the receiver, then continuously press the power button, and the green light will continue to shine for 5 seconds, entering a flashing state. At this time, you should press the Y button on the remote control within 10 seconds to complete the pairing. If you do not press the Y button within 10 seconds, you need to repeat the above work.

2) Two receivers can work simultaneously, or they can be converted to a single control operation. Simply pair the receivers according to the matching method to complete the connection.

3) The receiver has a power-saving function. When the receiver is stationary, it will automatically power off after 15 seconds to protect the device and conserve energy by entering a sleep mode.

4) The receiver has an active roller that makes a noise when shaken. The roller's function is to restart the receiver after power-off sleep. That is to say, when the dog barks or moves, the roller will shake, and the receiver will enter a standby working state.

5) The receiver should be placed under the dog's neck (at the throat), adjust the tightness of the collar, the collar should be able to fit a finger, not too loose, otherwise the shock screw contact point will not touch the skin, which will seriously affect the use effect;

6) It is equipped with a diode and four metal caps. The diode can be used to directly test the intensity of the electric shock. Simply clip the diode onto the two screws of the receiver. The metal caps must be installed on the receiver to effectively approach the dog's skin.

Sixthly, the testing of the trainer:

（1）During testing, please adjust the vibration and electrical shock parameters of the remote controller to 100, and turn on the receiver switch.

(2) When testing vibration, set the remote control to the vibration state and press the Y key directly, and the receiver will vibrate;

(3) When testing the electric shock, attach the diode to the two screws of the receiver, adjust the remote control to the electric shock state, and press the Y button directly to discover that the diode's small light will shine.

If no such phenomena occur during testing, it may be that the remote control and receiver have not successfully synchronized or are set to the correct channel. Please re-synchronize.

7. Pet Suggestions

（1）Each dog's resistance and sensitivity to stimulation are different. When using this dog training device with the electric shock function, we recommend that customers start with the lowest level and gradually adjust to the level that the dog fears. The warning sound is fixed and cannot be adjusted larger or smaller.

(2) Electric shock is a punishment measure, while vibration and warning sound belong to the reminder function. When first used, the dog may not know that the electric shock is a punishment for its training and may even appear confused and very afraid. Because it does not understand why it is electrically shocked or vibrated; after a period of time, the dog will gradually adapt. Please use electric shock, vibration, and warning sound together as much as possible, and punish the dog as little as possible.

（3）At the beginning of the use stage, it is recommended that the owner conduct effective training and comfort for the dog, using food-assisted training to help the dog understand and get accustomed to it, so as to achieve the desired effect more quickly.

If you have any questions about using the service or any other issues, please contact Pai Pai Pet immediately. We are here to help you resolve any problems you may encounter.

8. Safety Precautions:

1) After dogs are fitted with a receiver, they may initially feel uncomfortable and it is necessary to prevent them from chewing or damaging the receiver.

Nine, packaging data information:

1) Total weight: 330g. Net weight: 245g.

3) Remote control 53 grams, Specification 13*4*cm;

4) Receiver 57 grams, specification 7*4.1*2.8 cm, high-quality silicone collar with a total length of 70CM, can adjust the size, suitable for both large and small dogs.