English neutral white box packaging, order hotline: 13735758480

Color box packaging needs to add 1 yuan.

Product Name: Sixth-Generation Pet Shock Collar for Silencing Barking

规格：

Product Introduction:

As long as you set a certain level, it can be fully automatic. This is the 2009 model of the second generation dog stopper. Compared to the first generation, it has 6 different current intensities, which can be manually adjusted. There are 2 keys on the back of the belt, one is HIGH, the other is LOW. Now you don't have to worry about your dog being electrocuted. As a high-tech pet product, the dog stopper is designed to train pet dogs more effectively and humanely. It is invented for dogs that bark excessively or in a stubborn situation. It is controlled by a microprocessor. The microprocessor distinguishes the dog's barking from the sounds of surrounding things. As soon as the dog barks, the dog stopper will automatically produce a stimulating warning sound and electric shock.

The warning sound and electric shock gradually increase with the continued barking, making the dog feel uncomfortable. By using this unique method of increasing the sound and electric shock to create a memory in the dog, it is proven that the stop barking device is a faster, less painful, and more humane way to prevent dogs from barking.

Function Description:

When a dog barks, the stop-barking device will emit a brief warning sound; if the dog continues to bark within 30 seconds,
The stop barking device emits a stronger warning sound and a brief, gentle electric shock when the dog continues to bark; the warning sound and the shock become stronger. This method is applied repeatedly in three stop barking modes. If your dog continues to bark after trying the three stop barking modes, then after each bark, the stop barking device will emit the strongest warning sound and electric shock until your dog stops barking. If the dog stops barking for 30 seconds, the stop barking device will automatically reset to the first "warning sound" mode.
Increasing the intensity of the warning sound and the pattern of electric shocks will help your dog form a memory, eliminating the bad habit of barking.

Instruction Manual:
1. Use this bark control device, it is almost fully automatic, without the need for electronic remote control adjustment or manipulation. It is equipped with 6V alkaline batteries and retractable.
When the dog's collar reaches the size of the dog's neck, the stop barking device will automatically start working.
2. Before putting a dog on a muzzle, you must be familiar with some knowledge about the muzzle. The muzzle uses a microphone to sense the dog's barking.
The microphone is located in the middle of the dog harness device, as shown in the above figure. It is easy to feel the dog barking through the dog harness microphone.
Electric shock is transmitted through the electrodes located below the device; there is a small hole in front of the device, which is the sound source of the warning sound.

Install/Replace Battery:
1. Enter the battery compartment, firmly press the engraved part of the plastic box, and slide open the battery compartment door.
2. Install the battery between the battery cells, paying attention to the polarity, as indicated on the battery sticker.
3. Slide the battery compartment door until the battery can be fully closed.
4. The average lifespan of a battery is 3 to 4 months. When the sound becomes significantly lower or the device stops working, it is time to replace the battery.

Installation Instructions:
Wear a muzzle on the dog's neck to stop it from barking.
Adjust the dog leash length by sliding the device on the leash. Ensure that the leash is securely fitted around the dog's neck to ensure direct skin contact with the electrodes.
The hair between the electrode and the skin will greatly reduce the electrical shock effect. If necessary, the pet's hair should be removed.
Clamp or shave to ensure direct skin contact.

Other pet supplies: