Simple Instruction Manual:

 

 

1. Original and genuine, patented design

 

 

Suitable for dogs weighing 10KG-60KG and with neck circumferences of 14-50 cm; suitable for medium-sized dogs.

 

 

3. Remote control range can reach 1000 meters (under the condition of no obstructions and interference).

 

 

4. 3 training modes: electric shock, sound, vibration, each mode can be adjusted to 99 levels.

 

 

5. Waterproof Charging Receiver, allowing your pet to swim freely in water.

 

 

6. Three modes can be freely combined and used, namely: electric shock + vibration mode; electric shock + sound

 

   Mode; Sound + Vibration Mode; Electric Shock + Sound + Vibration Mode.

 

 

7. Error prevention function prevents misoperations, i.e., holding the firing key down for a long time, with each operation having a valid time of 10 seconds.

 

   Then the receiver stops stimulating the dog with the signal, and the next effective work requires pressing the transmit button again.

 

 

8. The remote control has a built-in memory function, and each receiver can save 3 groups of memories, allowing one-button operation.

 

   You can now switch to your usual training mode for dogs.

 

 

Press the button 'M1' to select a memory group, and press the button 'M2' to set a memory group.

 

 

10. Remote control and receiver come with power-saving features to extend battery life.

 

 

11. If the remote control is not operated within 2 minutes, it will enter the standby state (display screen:

 

    The display content disappears after 5 minutes of inactivity with the remote control. The remote control will automatically turn off.

 

 

12. In a sleep mode, pressing any key can wake up the remote control, and the display will show the last operation content.

 

    In the off state, hold the mode button for 5 seconds to turn on the remote control.

 

 

13. If the receiver does not work for 5 minutes, it will enter the sleep mode. In the sleep mode, any movement will

 

    Activate the receiver to enter the standby state, ready to receive signal instructions from the remote control at any time.

 

 

14. Large LCD screen with digital display, training function commands are clear at a glance.

 

 

15. With the same remote control, you can train up to three dogs at the same time (requires three receivers).

 

 

    This link is standardly equipped with a remote control and a receiver (1:1 pair).

    If you need additional receivers, you can purchase them separately.