[1] It is recommended to use it in a well-ventilated environment. The bonding surface should be clean, dry, no dust, rough the surface before use to ensure the bonding strength, can be used between 10℃ to 32℃, temperature the best effect is between 21℃ and 29℃, and the temperature range that F6000 can withstand after curing is between-40℃ and 66℃, it is recommended to conduct a small-area test before formal use.

[2] apply F6000 directly on the surface to be bonded and press it tightly. F6000 starts to fattening after about two minutes, it starts to solidify in 10 minutes. In order to reach the maximum strength, allow the bonded parts to dry for 24-72 hours. When the temperature is low, the curing time will be prolonged, and when the temperature is high, the curing time will be shortened. You can use a hand-held hair dryer to speed up the curing. It should be set in the low temperature range, and do not directly face the all-purpose adhesive.

[3] you can use acetone or turpentine to remove the undried glue. The cured material can be removed or scraped off with tools.

[4] If F 60 million can be used to bond fabrics, do not dry clean the fabrics.

[5] F 60 million-energy glue is not recommended for bonding foamed polystyrene, polystyrene, polyethylene and polypropylene plastics.