Model: J-124 Black Vinyl Strip
 
Usage: J-124 Black Bar is a low-temperature EVA hot melt adhesive tape, which is suitable for electronic and electrical appliances, packaging, toys, jewelry, footwear materials, and other performance engineering plastic raw material supply services.
 
Physical properties:
Product appearance: black rod-like
Main ingredients: EVA resin, adhesive resin, wax, antioxidant, etc.
Solid content: 100%
Poisonous: Non-toxic
Softening point (Universal method): 80±2℃
Bullough viscosity:
180℃ ... 6000±500 MPa·s
 
50-0606T Automatic Asphalt Softening Point Tester - Test Softening Point
SD-2001 High Temperature Constant Temperature Valley -- Test Viscosity
SNB-2-J Digital Rotational Viscometer -- Test viscosity
 
Recommended temperature: 120-140°C
 
Packaging: Carton, 12kg/case
 
Storage conditions: Ventilated, dry, and shady place.
 
Equipment Cleaning Method: Consult the equipment manufacturer for cleaning methods, or clean the equipment with mineral oil or paraffin at 120°C.
Then use hot melt adhesive to wash, and the best temperature for the glue should not exceed 150℃.
 
Notes:
This glue stick will absorb moisture from the air. It is difficult to judge whether it has absorbed moisture by its appearance. Moisture-containing glue sticks may bubble when melted and reduce the bonding strength. Therefore, it is recommended to seal it after use to prevent moisture.
This bar-shaped solid substance is non-toxic. It does not require special safety measures. However, it should be avoided from touching the skin when in a melted state to prevent burns.