Specification

* Sensor: Advanced Semiconductor Oxide Alcohol Sensor

*Measurement Range: 0.00% - -0.19% BAC (0.0 - -1.9 g/l or 0.00 - -0.95 mg/l BRAC)

* Measurement accuracy: 0.01% BAC (0.1 g/l).

* Power: 2 x 1.5V Alkaline Batteries

* Operation Time: Preheating Time: 10s, Response Time: < 5 s

*Auto Shutdown: Approximately 35 seconds.

*Size: 95 x 36 x 18mm

Pre-warning

It is recommended to wait at least 20 minutes after drinking before using an alcohol test device. This is because it takes approximately 20 minutes for the body to absorb alcohol from the digestive system into the bloodstream. Additionally, it takes approximately 20 minutes for alcohol to dissipate from the mouth.

To ensure more accurate measurement results, please do not conduct a second test within 3 minutes.

-- Please do not smoke or eat within 20 minutes before the test.

-- Please do not use chemicals such as benzene, diluents, or gasoline to directly test an alcohol tester.

-- Please do not blow liquid into the alcohol test instrument airway.

-- Please do not expose the alcohol test instrument to any irritating substances, such as: pain meters, insecticides, alcoholic beverages, etc.

-- Please do not place the breathalyzer in a sealed space with polluted air.

-- Modifying or replacing internal components of the unit may cause a malfunction of the test instrument.

--This design is intended to help improve safe driving, and should not be used as a basis for the use and operation of vehicles, machinery, equipment, etc. The mentioned measures for blood alcohol content and poisoning are not references provided by the government, medical institutions, agencies, or individuals. It is solely used as a reference for BAC, and the manufacturer assumes no legal responsibility.

--Everyone's sensitivity to alcohol varies, and some people's BAC (blood alcohol concentration) may be below the legal limit for driving.