Instructions:
A: remove the glue from the etch
Soak in the degumming agent. The etch can be separated from the parts in a few minutes. After soaking for several hours, the glue on the etch will dissolve and disappear.

B: modify the wrong binding
Apply appropriate amount to the place where glue needs to be removed. Cover it completely. Wait 2-3 minutes for the glue to dissolve. Then wipe with a cotton swab.

C: remove glue marks on the surface
Apply an appropriate amount of degumming agent to the cloth and scrub the adhesive surface with the cloth. After a few seconds, the glue will dissolve. If the glue is thick, repeat until it is completely removed.

D: glue on clothes
Soak the glue on the clothes for a few seconds and then wipe with a cloth. Repeat until removed.

(warm reminder: this product is not easy to cause harm to most plastics or paint, but if you want to use it on paint, please try it on a small area first to ensure safety.)

Save:

This product should be far away from fire source, heat source, direct sunlight
Seal immediately after use and store in a cool and dry place. Below 25 ℃ storage shelf life: 24 months