Product Usage Method:
The back of the glue net drill can be covered with double-sided tape or hot melt glue in two ways, and normally it is covered with hot melt glue. If you need double-sided tape, please contact the customer service personnel in advance. There are three methods for fixing: the first method requires heating the hot melt glue, which becomes sticky after melting. You can use a heat transfer machine, a pressing machine, or an iron to heat it. The temperature should be above 150 degrees, and it should be dry ironed without water. It should be pressed on the drill for about 15 seconds, and it can be fixed. You can also adjust the temperature or time according to actual needs. If you are afraid of scalding, you can add a piece of cloth on the drill before heating. The second method is for clothing, wedding dresses, bags, shoes, and boxes, which can be sewn with a needle and thread. General needle and thread or fishline can be used~ Just pass through the glue layer~ The third method is for smooth surfaces such as mobile phones, laptops, shoe decorations, paper tubes, etc., which can be pasted with E6000 glue or AB glue. If it is double-sided tape, it can be pasted on after tearing it off.