E-8000 Diamond-Punching Special Needle Glue

Specifications: 10ml/15ml/50ml/110ml

【Applicable Scope"]Full transparency imported adhesive, two sizes, vacuum forming packaging, convenient for shipping and transportation, not easily damaged, quality assurance.The adhesive tape is more durable, and the needle design is convenient for operation. It is applied to various industries. It is suitable for repairing handcrafts, such as crystal, rhinestones, beads, watches, ornaments, headwear, and mobile phone cases DIY. The unique needle hole design allows accurate operation even for complex and small parts.

【性质】This adhesive is environmentally friendly, completely transparent, does not damage the material, especially suitable, especially convenient.

【优点】"Adhesive quality is superior, high environmental protection, beautiful packaging, convenient operation.

Typical features and uses: 1. Professional adhesive for water drilling. 2. Repairing small ceramic and wood sculptures. 3. Replacing broken pieces on damaged cups. 4. Handicraft assembly design. 5. Repairing garden and garden statues. 6. Filling cracks and cracks in wood frames. 7. Reconstructing damaged corners. 8. Filling nail holes and drill holes. 9. Adhering ceramic pieces to wood or metal cemented to concrete. 10. Can be used in busy traffic areas as a protective layer for contact surfaces. 11. Good acid and alkali resistance, suitable for use as a corrosion-resistant protective coating in acid and alkali environments (such as salt water or sulfuric acid). 12. Insulation performance: It has excellent dielectric insulation and resistance, suitable for use in electronic equipment. 13. Non-flammable. 14. Other: High impact resistance and will not shrink, burst, or droop during the curing process. After curing, it can be polished, ground, filled, lightly hammered, cut and drilled, and can be painted with most paints. It can be molded into any shape to replace the damaged or missing pieces. It can be constructed on both horizontal and vertical surfaces without drooping. Easy to match with colors, compatible with powdered pigments, most water-based pigments and food dyes.

【E8000 Technical Data】

Appearance: Transparent semi-fluid

Solid content: 33%-45%

Curing hardness: 78-98A

Surface dry time: about 3-6 minutes

Curing Time: 24-48 hours

Gelatin: Transparent, soft, semi-conductive

Characteristics: does not turn white, does not become brittle, does not yellow, does not harden, very small odor

Save: Store at 10°C to 30°C

Concentration Comparison:

B-6000（3500CPS）

B-7000（2800CPS）

E 8000 (3000CPS)

Usage Method and Precautions

1. Read the instructions before use. Only use in an environment with good ventilation. The surface to be bonded should be clean, dry, and free of dust. Before use, rough the surface to ensure the bonding strength, and it can be used between 10℃ to 32℃. The effect is better between 21℃ to 29℃. This adhesive can withstand temperatures between -40℃ to 66℃ after curing. Before formal use, perform a small-area test.

Apply a thin layer of the adhesive directly onto the surface to be bonded, press firmly, and wait for it to start thickening after about two minutes. It will start to solidify after 10 minutes. For higher strength, allow the bonded parts to dry for 24-72 hours. The curing time will be longer when the temperature is low and shorter when it is high. You can speed up the curing process by using a hand-held hair dryer, but it should be set to the low temperature setting and not directly aimed at the adhesive.

3 You can use acetone or turpentine to remove unset glue. Once the material has cured, it can be removed with a tool or scraped off.

4 If this universal adhesive is used to bond fabric, do not dry clean the fabric.

Model 5: This universal adhesive is not recommended for bonding foam polystyrene, polystyrene, polyethylene, and polypropylene plastics.

Storage Method: Store at temperatures between 10 and 27 degrees Celsius. Freeze/Thaw: Allow the product to reach room temperature before opening the lid.

Product Image Reference

Adhesive Packaging Specification Image

15ml: 100 pieces/box, 1200 pieces/case

50ml: 15 pieces/box, 360 pieces/case

110ml: 12 per box, 120 per case

Same model adhesive recommended (click the picture to enter the link)

Business field (usage)

A corner of the production equipment