- products can be specially customized for customers

The main structure

The oxygen mask is composed of a hood, a hood joint, an oxygen tube path, a cone, a nose clip, and an elastic band.

Can be divided into ordinary masks, atomized masks.

There are adults, children with and without atomizers.

 

Scope of application

The product is connected with oxygen delivery system for human inhalation of oxygen.

 

advantages

No cytotoxicity, no more than I level sensitive reaction, no skin irritation.

The oxygen supply is smooth, the atomization effect is good, and the particles are fine and uniform.

The shaped aluminum block is attached to the bridge of the patient's nose and is comfortable to wear.

 

Directions for use

1. Confirm to open the package and take out the oxygen masks within the sterilization period;

2. Put the mask over the patient's mouth and nose and fix it, adjust the nasal clip and tension on the mask to prevent oxygen from entering the eyes;

3. Connect the oxygen pipe connection with the gas transmission device;

4. If the patient feels airtight, please cut the small air vents on both sides of the mask.

 

Matters needing attention

1. This product has been sterilized by ethylene oxide, and the sterilization period is two years.

2. This product is limited to one-time use and will be destroyed centrally after use;

3. The inner package is damaged, and it is prohibited to use;

4. See the seal for the batch number or date of production;

5. It is recommended to test the smoothness of the product before use.

6. It should be stored in a dry, ventilated room free of corrosive gases.