Operation instructions:
The keyboard
Press MENU button to start cyclic conversion from 1 (schematic diagram of working mode), and the corresponding indicator light is on (press MENU button when the POWER light is on).
When pressing the POWER button, the POWER indicator light is on and works in the corresponding mode. Press the POWER button again to stop working.
1: POWER button switch ()
2: strong light mode work indicator ()
3: pulse mode work indicator ()
4: fade mode work indicator ()
5: working hours display ()
6: mode switch ()
The machine can customize the setting mode working time, the longest 40 seconds, long press MENU to enter the setting state, short press select mode long press exit setting, press POWER button to select the corresponding time.
The machine has the function of intelligent battery detection. When the battery power is low, it will alarm and automatically shut down. At this time, it should be charged in time.
The device shut down automatically after one minute without key operation, and the power indicator and function indicator are off. If you need to start up, press the power switch again to start up.
The charging mode of the charging LED curing machine is constant voltage charging, and the charging time is about 8 hours!
Specific operation
The first mode is high-light mode: when the indicator light is on, press the power switch to enter the high-light curing mode. The buzzer will sound \"di\" every five seconds, and the countdown of running time will be finished automatically.
The second mode is gradually on. When the indicator light is on, press the power switch, and the power indicator light is on, you can enter the gradually on solidified mode. The buzzer will sound \"di\" every five seconds.
The third mode is pulse mode: when the pulse indicator light is on, press the power switch, and the power indicator light is on, then it can enter the pulse solidification mode. The buzzer will sound \"di\" every five seconds, and the operation time will end automatically after the countdown.
