Solar-powered animal repeller

 About the product:

 1. The product uses infrared thermal emission sensors, and the sensitivity of the sensors to animals is related to their movement direction. They are not sensitive to radial movement, but are most sensitive to transverse movement. This means that if the animal is stationary or approaches the product directly without making transverse movements, the infrared sensor will not detect it, and the product will not work on the animal.

 2. It uses infrared detection principles to detect small animals while emitting ultrasonic waves to drive them away. It can help you avoid the harassment of unwanted stray dogs, stray cats, and other small animals, thus protecting your property, your garden, and your courtyard.

Due to its portable design, this product can be installed anywhere in your home, garden, or yard. It can be used with low-voltage power or batteries. This product is only used to drive away animals and does not contain any chemicals. It emits ultrasonic frequencies to drive them away. It will not cause any harm to human health.
1) Speaker: This product can emit high-frequency sound to drive away animals.
2) PIR (Passive Infrared) Motion Sensor: This is an infrared motion sensor that continuously outputs a signal. When it senses the presence of moving animals within its detection range, it automatically emits a sound wave frequency to drive the animals away, and the LED indicator light will also turn on.
3) When the infrared sensor detects that the animal has moved away, the LED indicator will automatically turn off.

 4) The product now includes new lighting flash and sound, frequency adjustment, and sensitivity adjustment functions, making it more targeted in repelling animals and achieving better results.

 5-speed frequency adjustment:

 0档：OFF

 Gear 1: 13.5KHZ-19.5KHZ, mainly for animals such as mice, dogs, rabbits, foxes, and mink.

 Gear 2: 19.5KHZ-24.5KHZ, mainly for cats, raccoons, badgers, skunks, and other animals.

 Gear 3: 24.5KHZ-45.5KHZ, primarily for bats, birds, mice, and other animals.

 4th gear: LED strong flash, can drive away raccoons, snakes, boars, mink, and other animals.

 5th gear: LED light bursts at 5.50 kHz, full-range animal repellent with light flash. All functions work simultaneously, with the frequency switching between the first to fifth gear, accompanied by a strong LED flash.

Single weight: 0.45kg

Color box size: 15.6*15*9.5CM

Weight: 18KG/19KG

Crate Size: 59.9*49*33CM / 40PCS

Battery material: AA Ni-MH battery, 5th chargeable battery

Operating Instructions

- Powerful ultrasonic repels animals. When animals enter the area, the infrared sensor is triggered, and the product emits ultrasonic waves to make the animals feel uncomfortable, thus making them leave the area.

- LED strong flash to drive away animals. When animals enter the area, the infrared sensor is triggered, and the product emits a strong LED flash to frighten the animals and make them leave the area.

 Functional Description

-"Sensitivity” button (left): Sensitivity and sensing distance can be adjusted. Rotate the knob clockwise, and the protection range will gradually increase. 

-"Frequency" button (right): This button is used to adjust the ultrasonic frequency. Rotate the knob clockwise, and the ultrasonic frequency will gradually increase.

Installation Instructions

1. Open the battery cover on the back, install 3 AA rechargeable batteries, and then close the battery cover. (If the batteries are included in the standard equipment, this step can be omitted.)

2. Place the product in the area that needs to be protected. (For example, flower beds or walls, etc.)

3. Please choose an appropriate orientation to ensure that the solar panels at the top can absorb the maximum amount of solar energy.

4. If the product is installed underground, please carefully insert the ground rod into the soil. (Please refer to the diagram). Please ensure that the ground rod is exposed about 12cm above the ground. (Please refer to Figure 2). It is recommended to carefully insert the product after digging a hole in the ground to protect the product from damage.

5. The product can be inserted into the soil, hung on the wall, or placed on other flat surfaces.

Parameter 

● Infrared sensing angle: 110 degrees

●Sensing distance: 8-9 meters, depending on the size of the animal. (The larger the animal, the farther the sensing distance).

● Power Supply: Solar power, 3*AA rechargeable batteries, or can be powered by a 5V 500mA adapter

● When the link adapter is connected, the product can operate, but the infrared sensor detector does not work.

● If you encounter long periods of rainy weather, you can charge using the adapter.

● Red LED light on: Product senses animal

 About Batteries

1. If the battery has not been used for a long time (1 month), the battery power may be exhausted. It is recommended to fully charge the battery 3-5 times to ensure normal use.

2. After a certain period of use, the battery life will change and quickly charge, at this time please replace the battery.

3. If the battery cannot be used for a long time, please replace 3 AA 1.2V rechargeable batteries (Ni-Cd or Ni-MH). The better the battery quality, the more sufficient the power, the better the use effect will be.

4. Please dispose of unused batteries at the local recycling center. For more information, please consult the local relevant departments.

 Notes

 Sometimes humans can perceive some ultrasonic waves. Please keep the product away from living areas. Do not place the product in areas where infants and children often move.

  Please do not obstruct the infrared motion detector. When cleaning the product, please use a soft cloth and soap to clean, and do not use any chemicals or corrosive substances to prevent damage to the product.