Better quality, better service!!
For details, please consult: Landline: 0579-89355500
                     Mobile phone: 139 5793 7914 (same number as WeChat)

                                                    
Product information:

Voltage: 220V /50HZ

Power: 1.35 KW/h

Product size: 940*500*1600mm

Production capacity: two minutes per plate

Product display

Products use

1: the firstThe popcorn machineTurn on the heating switch, put in 50 grams of peanut oil, press the rotary switch, preheat for 3 minutes, then turn off all switches and pour out the peanut oil. (By this operation, the service life of the new machine will be increased more than twice.)

2: Turn on all function switches (lighting switch, heating switch, rotary switch), then add 50-60 grams of special cream for popcorn (or coconut oil, frut-flavored oil), and 100 grams of special corn for popcorn. (The wok must be preheated for 3 minutes), finally putCommercial popcorn makerSpecial white sugar 60-70 grams. Then lower the lid and close the glass door.

3: Operators should pay attention to the situation of popcorn, such as pop sound becomes smaller, rice flowers burst out in large quantities, immediately turn off the heating switch, and then continue to rotate for 3 to 5 minutes, immediately pour out

4: Clean the bottom of the pot, wipe the pot with a half wet towel, (if the bottom of the pot is scorched phenomenon, should immediately add 150ml boiling water, water can cover the bottom of the pot, and then heat rotation for 10 minutes or so), make it clean before the second pot.

5: After the popcorn machine is stopped using, keep the machine clean and tidy. There is no oil stain or water mark on the glass. Garbage plates must be cleaned in time. Turn off all function switches and power supply.

1. Power should be cut off during cleaning and maintenance, and plug should be unplugged to prevent accidents.

2. Clean the surface of the fuselage with semi-dry and wet towel without corrosive cleaning. It is strictly prohibited to directly flush the rice plate and the whole machine with water, otherwise water will seep in and destroy the electrical properties, affecting the normal work of the product.

3, it is not allowed to use metal hard things to wash the inside and outside of the grain blasting machine plate, so as not to cause damage to the non-stick coating inside the plate.

4. Unplug the plug and cut off the power supply for a long time, and keep it properly.

Cleaning and maintenance

1. Power should be cut off during cleaning and maintenance to prevent accidents.

2. After work every day, wet towel should be stained with non-corrosive detergent diluent to clean the surface of equipment and power line. It is strictly prohibited to directly wash the surface of electrical box with water to avoid damaging the electrical performance. Warning: Do not use steam cleaner for cleaning.

Landline: 0579 --89355500

Phone: 13957937914

Email:avelyn.cai@hotmail.com
SKYPE:avelyn.cai.hotmail.com
Website: www.dreamdar.cn

The company map