Name: GL-1203-F plastic head tire pressure pen

[Material] aluminum alloy rod

[Specification] diameter 1cm, length cm

[Packaging] Bulk

[Packing quantity] 500

[Box gauge] 48*21.5 * 58cm

Procedure:

1. The vehicle needs to be parked on the flat ground, and the tire pressure must be measured when the vehicle is cold;
2. First check whether the reading of tire pressure gauge is in the position of "0". If not, press the button on the tire pressure gauge side to clear it;
3. Remove the valve cover of the tire and press the tire pressure gauge pressure measuring nozzle vertically against the valve on the tire. The pressing speed needs to be rapid so as not to cause air leakage in the tire;
4. Press tire pressure gauge hard and observe whether the pointer is stable. Quickly dial out tire pressure gauge after the pointer is stable, Reading; (generally, stable tire pressure reading can be obtained immediately)
5. Determine whether the tire pressure meets the requirements according to the tire pressure requirements on the door side and the driver's experience; If the tire pressure is too high, the tire pressure gauge can be used for deflation; If the tire pressure is too low, immediately replenish the gas to the safe tire pressure, and re-measure and check the accurate tire pressure;

【







Yiwu city, Zhejiang province Cabernet auto products factory
Booth address: 69417, 69397- 3 Street, 2nd Street, 4th Floor, North connection, gate 111, zone 5, Yiwu International Trade City, Zhejiang province
Factory Address: No. 496, chengdian Road, Yiwu city, Zhejiang province
Contact: Xu Dongying
Tel: 13362914084...
Consultation buckle: 2355423787