Export products, countries around the world, a variety of styles

1.The product uses imported SMD chips, and the ultra-thin board design enables better installation and adhesion, resulting in more uniform illumination and avoiding the disadvantages of poor illumination width caused by point-source lighting. The product is suitable for use with 10-13V voltage. This SMD product features diffuse light source, wide-angle illumination, and high lumen density.
2.Luminescence is instantaneous, with high purity of light, strong color rendering and penetrating power.
3.Adopting LED light-emitting diodes, it consumes less power and can better protect the car's electrical circuit.
4.LED does not have filaments, has good heat dissipation, low current, low heat generation, and the vehicle circuit is less prone to oxidation.
5.Highly resistant to seismic activity and with low temperature rise, it is a revolutionary new generation of solid-state light sources.
6.Suitable for DC 10-13V.
【Product Notice】:
No need to modify the circuit, simply replace the original traditional glass bulb, be aware that the original bulb is quite hot, prevent burns!
Refer to the product's dimensions when installing to ensure there is enough space for the installation location. Gently press the LED, do not squeeze the LED chip to avoid damage. LEDs have polarity, if they do not light up, reverse the direction and reinstall;
【LED Features】:
1.Can directly replace the original car traditional tungsten filament bulb.
2.LED emits high purity light, does not require a lampshade to filter the light, and the wavelength error is within 5 nanometers.
3.LED lighting has no delay, whereas traditional incandescent bulbs have a 0.3-second delay. LEDs consume less power; when achieving the same level of light output, they use only 6% of the energy as traditional bulbs, also contributing to energy saving and fuel efficiency!
4.With a super long lifespan, its structure without filament does not generate heat, and it can last over 6 years under normal conditions.
5.LED headlights can prevent the vehicle's control circuit from oxidizing, with a maximum load current of 0.1A.