Password-protected door and window alarm

Our company's patented products

Password Alarm

Product Model:YL – 353

Work Mode: CHIMEWelcome,InstantImmediately.DELAYtime delay

Battery:3节AA(4.5V）

Functional Description

When the magnetic strip is separated from the host by approximately1cmOr1cmThe above, the alarm host sends out an alarm sound or a ding sound to indicate the alarm.

On/Off

After installing the battery, enter the password and press.“#”At the end, LEDWill be lit, there is a10Second delay, during which no sensing or alarm work is performed.10Entering a state of readiness in one second. If we enter the password again, press “#”At the end, LEDIt will blink for a few seconds before turning off, at which point the alert status will be cancelled.

Alarm sound

●CHIME--------Switch is inCHIMEStatus: Enter password+#”Turn on the feature, at this timeLEDWill be lit, there is a10Second delay, during which no sensing or alarm work is performed.10Enter the alert state in one second. Then, when the magnetic strip is separated from the host.1cmThe above, the alarm device will emit.2sound“Dingdong, Dingdong”Sound, when2sound“Dingdong”After the sound, stop guarding at this time until the magnetic strip and the host are separated again. If they are separated, then make a ding-dong sound again, and repeat the above steps. If you need to cancel the guarding state, wait until 2sound“Dingdong, Dingdong”After the voice, please enter the password.+" # Complete the stand-down, at this time, the redLEDWill blink for a few seconds and then turn off, at this time to remove the function.

●INSTANT-----Switch is inINSTANStatus: Enter password+#”Turn on the feature, at this timeLEDWill be lit, there is a10Second delay, during which no sensing or alarm work is performed.10Enter the alert state in one second. Then, when the magnetic strip is separated from the host.1cmImmediately report to the police when the above occurs.30Stop the alarm after one second, then stop the vigilance. When the magnetic strip is again tightly attached to the host and then separated, the alarm will be triggered again. Repeat this process. If you want to stop the alarm sound, you can input the password during the alarm process.+" # Disarm the alarm, but do not cancel the vigilance. If you need to cancel the vigilance, you need to input the password again.+" # Completed, now in red.LEDWill flash for a few seconds before turning off, simultaneously disabling the function, or after completing a single alarm, enter the password.+" # Completed, now in red.LEDWill blink for a few seconds and then turn off, simultaneously disabling the function.

●DELAY---------Switch is inDELAYStatus: Enter password+#”Turn on the feature, at this timeLEDWill be lit, there is a10Second delay, during which no sensing or alarm work is performed.10Enter the alert state in one second. Then, when the magnetic strip is separated from the host.1cmAbove, enter the warning state and send out.DIDIalerting sound10Second, then alarm, in30Stop the alarm after one second, and stop the vigilance at this time. Until the magnetic strip and the main machine are separated again after being tightly together, the above steps will be repeated. If you want to stop the alarm sound, you can input the password during the alarm process.+" # Disarm the alarm, but do not cancel the vigilance. If you need to cancel the vigilance, you need to input the password again.+" # Completed, or enter the password after completing a single alarm.+" # Completed.

Change Password

After the initial power-on, the default password is0000If you want to set a new password, the length can be1-12Any digit, any position+" - "Plus" "*" - "Asterisk，你就会听到一长声，说明你成功修改了一个新密码。例如：先按"旧密码（0000）AsteriskEnter"，click sound indicates the input is correct, then press "New Password12）AsteriskOK", a beep sound indicates that the setting is successful, and finally press "New Password (12）HashEnter to start working.