Tips: the parameters of each code table will not be exactly the same, and it will not be returned or exchanged if it is sold. Please see the details before deciding whether to buy it.

Packaging and magnet have been revised, please refer to the actual product received ~!

Name: Sunding SD548-B code table

configuration: watch body, watch bracket (wired with sensor probe), induced magnet, binding cable, manual.

Weight: about 100G

function: 1. Record driving speed ◆ 2. Record the total mileage ◆ 3. Record a single mileage ◆ 4. Display maximum driving speed ◆ 5. Show average driving speed ◆ 6. Display driving time ◆ 7.12/24 hour clock ◆ 8. Automatic loop function ◆ 9. Kilometer or mile setting ◆ 10. Tire circumference setting ◆ 11. Initial value setting of total mileage ◆ 12. Driving data sampling function ◆ 13. Maintenance reminder function ◆ 14. Automatic on/off (automatic shutdown after 300 seconds when the vehicle is not running, and clock function is retained)

1. Time display
2. Calculate the average speed
3. Detect instantaneous speed (0.0-99.9km/H);
4. Cumulative mileage (0.00-9999.00KM)
5. Maximum speed
6. Record one-way mileage
7. Cumulative exercise time (0:00:00-9:59:59)
8.12/24-hour clock
9. Power saving function
10. Maintenance prompt function
11. Automatic loop function
12. Motion information dynamic junction function

auxiliary functions: Male/mile conversion, wheel circumference setting, LCD automatic screen cleaning

whether the code meter is installed correctly or not directly affects the use accuracy and service life of the code meter. Please refer to the following tips for installation and debugging.

Special Reminder: non-contact, never damage your car, easy to install
1. The header seat is installed on the handlebar;
2. Load AG13 button battery into battery containers on the back of the meter head and initialize Cyclometer data (see the following instructions for details);
3. Insert the header into the header seat sliding chute;
4. The sensor is installed on the front fork, and the sensor head part is facing the spokes;
5, induced magnet installed on the spokes, aligned with the sensor head, about 3mm apart;
6. Use nylon cable tie to fix the cable;
7. Check whether the above meter head seat, inductor and induced magnet are installed firmly. This packaging tape the necessary rubber gasket and detailed instructions in both Chinese and English to ensure your installation is successful. Thoughtful!
OK, it can be used normally now!

How do I initialize Cyclometer data?
According to the actual situation, generally, you only need to set a parameter for the circumference of the tire to be used normally. For more information, see setting in Chinese and English.
 

Set function

1. Install the battery and battery containers on the back of the meter head;
2. Press the right button to enter the tire circumference setting within 15 seconds;
3. Refer to the comparison table of wheel diameter and circumference. For example, if the wheel circumference of 28 models is 224cm, press the left key to set the three-digit value to 224 (the default value of this machine is 208cm
4. Right click to confirm;
5. Why is there still a bunch of things? Don't worry about it, right-click to confirm, test it. For more information, see the English and Chinese statements.