Basic Parameters:
Input Voltage: DC 12V (Direct Current 12V)
Product power: 5W
Color temperature: 6000–8000K (strictly symmetrical on both sides)
Product Features:
1. Novelty 2. Easy to install 3. Low power consumption 4. Stable quality 5. Ultra-thin and stylish
Installation method: It can be connected directly to the car ACC circuit, the ignition wire, or the cigarette lighter cable.
Fixed method: The daily lantern comes with 3M adhesive in the packaging. Before application, clean the surface to be attached. Heat the 3M adhesive with a hair dryer, then attach one side to the back of the daily lantern and the other side to the installation location on the car.
What is a Japanese lantern?
1· The daytime running lights installed at the front of the vehicle are lights that help the vehicle be more easily recognized during daytime driving.
2. Its effectiveness is not for driving purposes
3. Of course, installing daytime running lights makes the car look more stylish and impressive, but their main benefit during the day is not aesthetics, but enhancing the vehicle’s recognizability.
Turning on the daytime running lights while driving abroad can reduce accidents by 1.2% and the probability of fatalities due to vehicle incidents by 26.4%. In summary, the purpose of daytime running lights is for traffic safety.
5. Please ensure your vehicle has an appropriate installation location. It is usually installed next to the fog light on the front side of the car, or in the netted area of the front bumper.
[LED Features]:
1. Can be directly replaced with the original vehicle’s traditional tungsten filament bulb;
2. The LED has high purity, requiring no lamp cover for filtering, and the light wavelength error is within 5 nanometers.
3. The LED lights up without delay, while traditional tungsten filament bulbs have a delay of 0.3 seconds.
4. The LED consumes low power. When it achieves the same brightness as traditional bulbs, its power consumption is only 6% of that of traditional bulbs, and it also helps save electricity and fuel!
5. It has an extremely long lifespan; its no-filament structure does not generate heat, and it can be used under normal conditions for over 6 years.
6. The LED vehicle lights help prevent the vehicle control circuit from oxidizing, with a maximum load current of 0.1A
Product Features
1. Long service life: Lifespan of 50,000 – 100,000 hours; generally no replacement is required during the vehicle’s service life.
2. Cost savings: The original vehicle has one 21-watt light; each LED light is only about 1 watt. The entire vehicle saves over 100 watts! Saving electricity also means saving fuel, and over five years, this will save over 100 liters of fuel.
3. No fine: Thanks to the long lifespan of LEDs, fines resulting from sudden loss of lighting fixtures are avoided;
4. Circuit safety: In the vehicle lighting circuit, the current decreases from over ten amps to less than 1 amp, significantly reducing the risk of a fire;
5. Safety: Due to the fast lighting speed, it provides more time for the following vehicle to brake. It is measured that at a speed of 100 km/h, it can reduce the braking distance by 7.5 meters for the following vehicle.
6. High brightness: Compared to traditional bulbs, LED has pureer colors, higher brightness, and is less prone to fading, providing better warning capabilities;
7. High intensity: The shock resistance and impact resistance of LED lights are far superior to those of ordinary bulbs, and they also have advantages such as small size and strong environmental adaptability.
