401 adhesive is a general-purpose, medium-viscosity fast-drying glue. It is used on inert surfaces and adheres to porous, acidic, and absorbent materials. It is widely used for bonding and bonding of metals, plastics, rubber, wood, leather, ceramics, wood, and more.

1、Single ingredient: solvent-free, convenient to use.

2. Rapid bonding: Bonding can be achieved in a very short time using the trace amount of water vapor in the air.

3. Room Temperature Hardening: It can be used without heating at room temperature.

4、Transparent and colorless: Excellent effect and no quality degradation.

5、High Strength: Suitable for bonding of porous and absorbent materials.

6、Medium Viscosity: Suitable for small area bonding.

1. First, clean the surface, removing any dust, oil, rust, and other contaminants. For metal surfaces, it is best to first grind the surface. For PE, PP, or TPEE plastics, it is necessary to first activate the surface.

2. Open the front cover and gently tap the tip with your fingers to ensure no residual liquid remains, then cut out the holes with scissors.

3. Drop a small amount of adhesive on the surface to be joined, immediately proceed with the joining, and maintain until the adhesive is fully hardened. The area of the joint should not be too large, and the thickness of the joint layer should not exceed 0.2mm.

4. After use, wipe the container, cover the lid, and store it in a cool and dry place or refrigerate.