Warm Tip:

1. Please do not puncture the atomization film of the spray nozzle!!!

2. Before using it for the first time, please remove the cotton swab (be sure not to lose the spring at the bottom), immerse it in water for 1-2 minutes to allow the cotton swab to fully absorb water, and then use it.

3. Only tap water or mineral water is allowed, not pure water (which will affect the mist effect).

Usage Method and Function:

1. Turn on the power and press the button lightly to activate the continuous spray mode. Press the button again to activate the intermittent spray mode (sprays for 4 seconds then stops for 6 seconds), and pressing it a third time turns the device off.

2. On power-on, long-press the button (without releasing) for two seconds to turn off the night light (multicolor light), then long-press again to turn it back on.

3. All spray mode settings will automatically turn off after 3.5 hours and can be restarted to continue use.

4. For the first time, fill the water to the top (about 90%), let it stand for 3-5 minutes, then turn on the machine.