Product diameter 2.5cm single weight: 4.5G.

Packed as opp bag. (Each bag is equipped with a 14mm steel ring) suitable for collar wear

Back picture

1, first edition commonly known as Master, original, and sample. The first edition of popular ornament is based on the designer's drawing design requirements, using terne metal plates, through drawing transfer, cutting saw, mechanical grinding, carving knife cutting, sandpaper polishing, auxiliary copper (copper drill Cup, copper wire, copper bead and other small accessories) welding and forming relief process. It is the primary link in the production process.

2, sub-version the first version of the product, which was cast and turned over for the first time, has been manually repaired, sanding, and overall processed at the edges, smooth surfaces, drill positions, fake beads, etc, waiting for the mold type of batch production mold.

3, pressing die use special rubber A and B, arrange and place the first version or sub-version, and carry out procedures such as digging, filling, pitching talc powder, placing mold nails, mold core, etc. to make the initial mold that can be separated and opened and closed, placed in iron or aluminum, it can be opened and closed for mold, then enter molding press to press, and pass150℃ left and Right high temperature vulcanization45~60 minutes, that is, it is formed into a flexible semi-finished mold. Open the mold and take out the first or sub-version. Use art knife or scalpel to fill the mold with mold core as the center point of centrifugal force, and open the flow groove (commonly known as water outlet) of the liquid alloy.. Molded rubber mold can withstand400~500℃ the liquid terne metal is repeatedly poured and cast. Pressing die is an important link to realize mass production of castings, and the quality of pressing die directly affects the yield of casting and sand turning.

4, sand turning place the rubber mold in the centrifuge, pour liquid terne metal or zinc alloy into the inlet of the centrifuge, and use the rotating centrifugal force of the centrifuge to inject liquid terne metal or zinc alloy from the middle of the rubber mold, the rought blank of the product is formed by throwing the cutting nozzle groove into the template around the mold.

5, trimming use tools such as blades and file to clean up the burrs on the rought blank of the product turned over.

6, welding using the principle of air pump generating air pressure backflow compression on Oiler and oil tank, vaporize the liquid gasoline in Oiler and oil tank, then conduct it to the compression swing head of adjustable air flow of welding gun through leather tube, and ignite it with open flame, generate a blue flame beam with a temperature of nearly 1,000 degrees. During welding operations, assist solder wire and solder to weld corresponding metal accessories on the back of alloy ornament.

7, polishing polishing methods are mainly divided into semi-mechanical wheel polishing and mechanical shock machine polishing. Semi-mechanical wheel polishing: commonly used wool cloth wheel waxing polishing method, that is, both hands hold rought blank of the product, use the weight of the hand, with the rapid rotation of wool wheel, produce uniform friction modification, make the product reach smooth surface without mist particles and sand hole defects. Mechanical Shock Machine polishing: mainly used for surface treatment of small glossy or non-glossy popular ornaments. The repaired edge product rought blank is mixed with the steel Jade in the shock bucket, and some water and detergent (lubrication effect) are added to achieve the polishing purpose through vibration friction.

8, link assembly according to the functional requirements of various popular ornament, with corresponding metal accessories such as chains, clips, fasteners, etc., link with copper ring (hoop);

9, electroplating alloy is one species gray material, I guys see the brilliance capture objective imitation real decoration all products are electroplating yes, electroplating by job art method is hanging plating and barrel plating division; from electroplating the effect is plating gold, silver plating, copper plating, nickel plating, plating white steel there are other special ones electroplating effect.
10, effect production electroplating OK decoration product, some are already sutra can enter immediate packing library yes, also there are some decoration product basis design requirements also do everything on it species each sample for example: painting oil ( roast thin coating), spray paint, scrub, dripping oil, onion sand, etc.; If some production product no need to point drill yes, that is it you can buy it library yes.
11, point drill this it's work art the last step, water drill use one species special bonding agent stick it on, according design it is required to match each species effect color water drill.
12, package in library pass pass product inspection qualified production product, packaged library you can go public.

Ornament maintenance
1. Put it away when you don't wear it at ordinary times. It is better to pack it in bags to prevent the surface of the silver ornaments from coming into contact with the air and turning black by oxidation.
2. Wipe the surface of the ornament with a soft cloth when wearing to keep the luster.
3. Do not wear other precious metal jewelry at the same time when wearing ornament, so as to avoid collision and deformation to scratch.
4. Avoid contact with water vapor and chemicals, do not wear swimming, especially to the sea.