alias: water stop steel plate. In the box-type Foundation or basement, the bottom plate and facade panel, the concrete of the top plate is poured separately. The next time the concrete of the wall plate is poured, there will be a construction Cold joint, when the position of this seam is below the underground water level line, water seepage is easy to occur. In this way, it is necessary to carry out technical treatment on this seam. There are many treatment methods, among which the more common method is to set water stop steel plate.

thickness (thickness):2mm 2.5mm 3mm

The water stop steel plate is a steel plate with 300 or 400 width set in the construction joint position when the horizontal and vertical members of the basement of the building can not be cast at one time. The two ends of the steel plate are warped and can play a good waterproof role. The general steel plate water stop belt is made of cold-rolled plate as the base material, because the thickness of the cold plate can be uniform, and the thickness of the hot plate can not reach the degree of uniformity. The thickness is generally 2 millimeters or 3 millimeters, and the length is generally processed into 3 meters or 6 meters

believe in professional power!

We are serious about making waterstop steel plates!

Waterstop steel plate please select Redlon!

Redlon goes with you!!!

Believe in professional power!

We are serious about making Steel strip!

Good  Steel strip,  please choose REEDRLON!

REEDRLON with you toghter! ! !