Product box size: 35*33*29.5CM Gross weight: 12KG Quantity: 600 pieces per piece

The aluminum shell comes in blue/black/red/white colors. If you have a color preference, please leave a message. Otherwise, the color will be shipped randomly.

Material: Aerospace aluminum alloy Battery: Features 3 AG13 button cells, affordable and easy to replace. Range: Over 5 meters High-brightness new technology light bulbs are used, with a lifespan of over 100,000 hours, allowing for easy illumination of entire hallways. The bulbs are extremely energy-efficient and can be powered by button cells for emergency use.

Note: All prices on this website are factory prices and do not include tax. If you need to open a bill, please contact the customer service to add tax points.

1. Usage Instructions

1. Check the battery: Ensure that the battery is charged and installed in the correct direction, such as in a flashlight.
2. When using a flashlight, choose the battery based on the requirements of the flashlight and the voltage, do not use randomly, to prevent the circuit board from being burned out, do not use different models and voltages of batteries at the same time;
3. During use, when the flashlight's brightness significantly changes, turn it off to prevent excessive discharge of the battery and charge it in time; Pay attention to the flashlight's waterproof, moisture-proof, and anti-fall features. After the indicator light changes when charging, remove it in time to avoid overcharging;
4. Batteries that have not been used for a long time should be fully charged and maintained, and the batteries should be replaced every three months or so to avoid chemical corrosion;
5. The inner wall of the lamp cup should be kept clean, and it should not be wiped with the hand or hard objects. To remove fingerprints on the lens, use a cotton swab dipped in lens cleaner to gently wipe it.
6. Do not leave the flashlight in direct sunlight, water, chemical products, or corrosive gases for a long time, to avoid damage to the flashlight;
7. Non-professional personnel are not allowed to disassemble the flashlight to prevent damage to the circuit board.