Steam Deck TV base with network port

* Product Parameters: HDMI2.0(4K60HZ)

RJ45(1000m)

PD(100W)

USB3.0 * 2
* Applicable devices: TYPE C 3.1 Interface Protocol/Switch/Steam deck

how to connect game host to a TV

* When connecting the game host to the TV, please refer to the following steps:
1. Connect the HDMI cable to the HDMI terminal of this product
2. Connect the other end of the HDMI cable to the HDMI terminal of the TV
3. Turn on the host, enter the main interface, and then insert the Type C terminal of transition socket into the host

※ Please do not use HDMI switcher, directly plug into the HDMI terminal of the TV
4. Turn on the TV and adjust the input signal of the TV to the terminal connected to game host.

※ When multiple HDMI devices are connected to the TV, select game host
corresponding terminal
5. Connect the charger to the USB C power supply terminal of this product
6, transition socket connected to the host, the video should be successfully delivered to the TV

when the picture cannot be cast to the TV
* When you find that the screen of the host cannot be cast to the TV, please refer to the following steps
check and try to connect again:
1. If you are not using the original charger and HDMI cable, please replace it with the original one and try to connect again.
2. Make sure that the HDMI cable has been inserted tightly.
















3. Make sure that the HDMI input source of the TV has been adjusted to the channel connected to game host.
4. Open the host and enter the main interface, then insert the host into transition socket