How to Choose the Appropriate Specifications:
1) Size: Match the size of the adhesive dots to the size of the object;
2) Thickness: It depends on the weight of the object, the contact surface, thickness, and hardness; low thickness is usually used for flat substrates; medium and high thicknesses are suitable for adhesive application on circular and irregular shaped substrates.
III) Viscosity: a) According to the smoothness of the object surface; b) Flat or with concave and convex surfaces; c) The degree of "no trace" required when the two objects are separated or whether permanent adhesion is needed.
The standard specifications and dimensions of removable adhesive spots:
1) Size: Round/Square/Rectangular/Striped, with diameters ranging from 5mm to 20mm per grain;
Two)、Thickness: from 0.2mm-2.0mm;
(3) Viscosity: Low/Medium/High.
Four)、Packing: Roll/Sheet;
five)、Customized sizes can be made according to customer requirements.
The use method of the adhesive dots:
Please be advised: Do not remove the adhesive drop with your fingers directly.
1. This product should not come into contact with oil or dust, as they may affect the adhesive properties and adhesion of the product. The surface to be bonded must be clean and dry, and it must be cleaned before using the adhesive.
2. When operating, avoid contact between your fingers and the adhesive surface. You must place the object directly on the "adhesive point" surface and press lightly. Immediately transfer it to the object, and it can be pasted onto another object. After pasting, you must press firmly to ensure full contact between the adhesive surface and the pasting surface, and no air residuals, so that the pasting effect is better.
3. Thicknesses lower than average are typically used for flat substrates; medium and higher thicknesses are suitable for adhesive applications on circular and irregular shaped substrates.
Wan Shuo
