Packing Information: 38*31*19cm/500pcs

Gross weight: 22.7kgs

This model is compatible with fixed codes, learning codes, and some rolling codes, suitable for countries in Europe, the Middle East, Australia, and the Americas!

New Quick Copy Remote Control Product Specification
New fast copy type remote control product description
1. Chip that can be duplicated:
2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200/HCS201 (partial codes), HCS300/HCS301 (partial codes), and some microcontrollers..........
1. Chips could be copied
2260 (all manufacturers); 2262 (all manufacturers); PT2264, 5326 (all manufacturers); SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers); 1527 (all manufacturers); 2240 (all manufacturers); HCS101, HCS200/HCS201 (part code), HCS300/HCS301 (part code), part single chip microcomputer..........
2. Decoding Method:
Press both the unlock and lock buttons at the same time (some shells are the up and down buttons), the LED indicator flashes three times, release any of the buttons you pressed, and click the button you released three times. The LED indicator will enter a fast flashing state, at this time, all the data in the memory will be cleared. After clearing the data, the remote control will not light up no matter which button you press.
2. Code cleaning method:
Press the unlock button and the lock button at the same time. Some shells are the up button and the down button. After the LED indicator light flashes three times, loosen any one of the buttons while the other is kept pressing, then push the released button three times. The LED indicator will enter into the fast flashing status.At this time all the memory data is cleared, the cleaned remote control will not have lighting LED indicator no matter which button you press.
3. Duplication Method:
Hold the original remote control in one hand and the clone remote control in the other, keeping both as close as possible (ideally, place the two remotes side by side on the table with no space between them). Press the buttons for the desired clone operation, and after the LED indicator flashes three times quickly, it will continue to flash rapidly, indicating that the clone has been successful. The operation for other buttons is the same. If the original remote control has a smaller transmitting power, it should be operated back-to-back with the clone remote control for a successful clone. If there are interference in the operating environment, avoid operating in that environment. If the clone is not working well, clear the code and try again.
3. Copy method
One hand keeps the original remote controller while another keeps the copy remote control. The two remote controls should be placed as closely as possible. The ideal situation is to put the two remote controls on the desktop side by side with zero distance respectively. Press down the copy button when the LED indicator light flashes quickly after three flashes.This copy is successful, other key operating methods are the same. Some remote controls have a smaller transmitting power, so the original remote control should be placed back to the copy remote control to be operated. For the presence of noise, it should avoid interference to operate. If the copy is not successful.It should be recopied after clearing the code.
4. Features of the New Dual-Copy Remote Control:
4. The features of new copy remote control
The four buttons could respectively copy four different types of chips, That is a remote control can operate four different types of facilities. The frequency is from 270MHz to 434MHz and more than ten frequency points. Faster copy data speed, not easy losing code, far distance.