Product Name: Four-hole Ice Ball, 4-hole Ice Cube Maker, Whisky Round Ice Ball Mold, Ice Cube Mold, Ice Maker, 4-hole Ice Ball Mold

Appearance Design Patent Number: 202130159672.8

Material: PP transparent body + black silicone lid

Single weight: 45g (including the white box packaging, total weight is 95g)

Single item size: 23*6.5*5.5CM

Standard Packaging: OPP bag, if you need a box, please contact customer service. The size of the white box is 6.5*6.0*23.3cm.

Crate dimensions: 68*32.5*71CM, 150 pieces per case, this product is a loose cargo, actual freight needs to be contacted with the customer.

Note (Drip Irrigation Requirements for Product): Hold the bottom second ball with your left hand (see details) and fill the product with water until it is full to three-quarters of the sphere. After that, please immediately place the product flat on a shelf in the refrigerator. The product uses a tight-fitting principle with plastic parts, which does not have a seal ring, and does not have a 100% sealing effect. There may be slight leakage when the product is upright, which is a normal phenomenon and does not affect the ice-making effect. Please note the correct usage. If you are concerned about this point, please be cautious when purchasing. Thank you!

P.S. : The reason why the drip irrigation is full in 3 hemispheres is that the density of water is greater than that of ice, and when the ice is formed, it is 4 balls, otherwise, when the water is full in the four balls, the ice mold will explode.

Appearance Design Patent Number: 202130159672.8

------------------------------------------------------------------------------------------------------------------------------------------------