The product features

1. The automatic control heating can continuously produce steam, which is convenient for continuous cleaning.

2. Pure high-pressure steam, without adding any chemical preparations, completely environmental protection.

3. The imported power cord can effectively isolate water and dust, preventing it from getting wet to ensure safety.

4. Corrosion-resistant and high-strength body.

5. The special heating tube and the pot body are integrated design, which can heat from all directions, with high heat efficiency and energy saving. 

6.3 meter extended electrical cord, more convenient to use.

7. Voltage, Power: 220V, 50HZ, 900W - Energy-saving, cost-effective, more economical.

 Product Specifications: 

Rated power supply: 220V/50Hz AC, with grounding socket.
Capacity: 450ml
Rated water capacity: 150-280ml, approximately continuous steam spray can reach 10-15 minutes.
Rated power: 900W
Steam pressure: 3.5Bar
Fuse action temperature: 172 ℃Extremely long power cord: approximately 2.6 metersProduct weight: 1882g

Product size: 26*21cmPower cord length: approximately 2.6mSingle color box size: 22*21.5*23.5cm

 Packing quantity: 8 pieces/boxGross Weight of the Outer Packaging: 15.5kgOuter packaging size: 46*46*49cm

Instruction: 1. Press and twist the safety cap counterclockwise from top to bottom to open it.

1. Add an amount of water equivalent to a measuring cup. 2. Clockwise twist the safety cap until it stops spinning (if the safety cap spins freely, press down from below until you hear a "tap-tap" sound, then tighten it). 3. Assemble the accessories as needed.

5. Connect the power cord, and the power indicator light will turn on. Wait for 2-5 minutes, then press the steam injection button to inject steam. You can then use it!

Notes: 1. Do not add any chemical items such as detergent! Only use tap water!

2. Do not fill the water too full when using it! Because there is a relief valve on the lid, and if the water is too full, it will overflow through the hole of the relief valve! 3. Add water during use and pour out water when finished: When opening the lid, make sure to exhaust all the steam inside! You must press it several times, and then slowly open the lid!

4. When changing the head, do not pull hard, but rotate it first and then remove it.

After cleaning is completed, please let the cleaner sit for a while to allow the body to cool down, then pour out the remaining water! This helps to protect the heater!

Product Principle Introduction: The principle of steam cleaners is to accelerate the molecular motion of dirt by generating high-temperature steam, thereby disrupting the bonding force between the molecules to achieve the goal of removing various stubborn stains. At the same time, it completely eliminates various bacteria, mites, microorganisms, and pathogens attached to the object. It comes with a variety of convenient accessories such as nozzles and bristle brushes, adhering to the concept of environmental protection without any chemical reagents, and achieving high efficiency in quick cleaning and sterilization.