Size: 24CM, 48'' Centimeter72Centimeter,96"Centimeter120CM

The price of this light strip in the mall is already very chaotic, and the product is a hard truth of 'you get what you pay for', so please avoid negotiating...

Voltage: DC10-14V

Power: 1 meter = 6W

Color: blue, white, yellow, green, red, pink, purple, multi-colored.

Length: 24CM 48CM 72CM 96CM 120CM

Approximate dimensions: width 0.8CM, thickness 1.3CM. Each 1CM has one LED. That is, how many LEDs are there for every 1CM?

Detailed Introduction: There is an LED every 1CM, which is very bright. The LED is encapsulated in transparent PVC and is completely waterproof. The gathering effect is very good.

Comparison of SMD Lights and Soft Light Stripes

Skin-mounted lights: Advantages - Very soft, thin, easy to install, can be directly pasted, easy installation, waterproof. 

Flaw: It is not as bright as soft light strips.

Soft light strips: Advantages - Soft, can be bent, very bright, water-resistant.

Disadvantage: Installation is slightly complicated; the fixing method varies depending on the angle.

Suitable for vehicles: cars, motorcycles, electric vehicles, and other places with 12V power sources. You can change it at will.

If you buy it too long, you can cut it yourself. Each section is made up of 3 LEDs. When you cut it, make sure to do it in sections of 3 LEDs.

High Brightness LED Crystal

Installed under the car chassis, on the side of the car body, on the side mirrors, bumper, and under the interior roof of the seat. When the car is lit at night, the car's undercarriage lights emit beautiful light, making your vehicle shine brilliantly.
Features:
1. Energy-saving, only consumes low power, suitable for any 12V car power supply.
2. Long service life
3. Full seal waterproof design, 100% waterproof.
4. The length of the light strip can be combined and extended arbitrarily.
6. Easy to install, can be installed inside or outside the vehicle.

Installation location: installed on the car chassis, grille, air intake, wheel rim.

Installation Method: Place the car on an appropriate position on the hoist or pit, and install one at each front, back, left, and right of the car's undercarriage.